Loading ...
Loading ...
Loading ...
.
Attach other end of high pressure hose to high pressure
outlet on pump. Tighten by hand.
3. Before connecting garden hose to water inlet, inspect
inlet screen. Cleanscreen (A) if it contains debris or have
it replacedif damaged. DO NOTrun pressure washer if
inlet screen is damaged or missing.
.
Run water through garden hose for 30 seconds to flush
it of debris. Turn off water.
IMPORTANT:DO NOTsiphon standing water for the water
supply. UseONLY cold water (less than 100%).
5. Connectgarden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
NOTICE
Using a OneWay Valve (vacuum breaker or check valve)
at pump inlet can cause pump or inlet connector damage.
ThereMUSTbeat leastten feet(3 rn)of unrestrictedgarden
hosebetweenthe pressurewasherinletandany'device,suchas
avacuumbreakeror checkvalve.
Damageto equipmentresultingfromfailureto follow this
instructionwill voidwarranty,
6, Turn ONwater, point gun in a safe direction and squeeze
trigger to purge pump system of air and impurities.
WARNING
IRisk of eye injury.
_Spray can splash back or propel objects.
Alwayswearsafetygoggleswhen usingthis equipmentor in
vicinityof whereequipmentis in use.
Beforestartingthe pressurewasher,be sureyouare wearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
Checklist Befere Starting Engine
Reviewthe unit to ensure you have performed all of the
following:
1. Besure to read Safety Ru/'esand Operationsections
before using the cleaning system.
2. Makesure handle is in place and secure.
3. Checkthat oii has beenadded to proper level in engine
crankcase.
4. Add proper fuel to fuei tank.
5. Checkfor proper hose connections (high pressure and
water suppiy) and that there are no kinks, cuts, or
damageto the higil pressure hose.
6. Provide proper water supply (not to exceedIO0°F).
10
Loading ...
Loading ...
Loading ...