Loading ...
Loading ...
Loading ...
,
Select desired ProjectPro® nozzle:
* Fordelicate rinse (lower pressure and higher flow),
for gentb cleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc. select yellow
delicate ProjectPro® nozzle.
Forgeneralrinsing (medium pressureand medium
flow), idealfor most atI purposecleaningsuch as
home siding,brick patios,wood decks,drivewaysand
sidewalks,garagefloors, etc., selectorangegeneral
ProjectPro@nozzle.
For maximum rinsing (higher pressure and lower
flow), for stubborn or hard to reach surface such as
second story surfaces, paint removal, oii stains, rust
removalor other stubborn substances (tar, gum,
grease,wax, etc.), select red max ProjectPro@
nozzle.
4. Pull back on collar, insert selected ProjectPro@ nozzle
and releasecollar. Tug on ProjectPro@nozzle to make
sure it is secureiy in ptace.
5. For most effectivecleaning,keep ProjectPro@nozzlefrom
8to 24 inches away from cleaningsurface. If you get the
nozzietoo ctose,you may damagethe cleaningsurface.
6. DONOTget closerthan 6 incheswhen cleaningtires.
Hew te Use the HydroFoam TM Launcher
The quick-connect on the nozzleextension aliows you to
attach the HydroFoamTM launcher. Usethe HydroFoamTM
launcher to appiy HydroFoamTM wash or other project specific
cleaners to heip break down stubborn dirt and grime on a
variety of surfaces.
Fellowthese instru_,-tiansta attach the HydrePeamTM launcher:
1. Engagetrigger iock oil spray gun.
2. Puli back coliar on quick-connect and puli current
ProjectPro@nozzle off. Store ProjectPro@nozzles in
holder provided on the accessory tray.
3. Puii back on coiiar, insert HyrdoFoamTM iauncher and
releasecollar. Tug on HyrdoFoamTM launcher to make
sure it is securely in place.
IMPORTANT:Also see the HydroFoamTM launcher and wash
instruction sheet for important instructions and uses.
Cteanin9 and Applyin9 Detergent
injury, and/or property damage.
NEVERusecausticliquidwith pressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
rnanufacturersinstructions.
l"e apply detergentfallow these steps:
1. Attach oneof the detergent siphon hoses following
instructions Attach OetergentSiphon Hose to Pump.
2. Review ProjectPro® nozzle and HydroFoamTM launcher
use.
3. PrepareHydroFoamTM washaccording to instructions on
the bottle or preparedetergentsoiution as required by job.
4. Makesure detergent shut-off valve on cleaning tank is in
"Off" position.
5. If using cleaning tank, pour detergent into cleaning tank.
NOTE:The cleaning tank holds one galIon.
6. Makesure HyrdoFoamTM Launcher is instaibd.
NOTE:Detergentcannot be applied with the high pressure
nozzles (Yellow, Orange or Red).
14
Loading ...
Loading ...
Loading ...