Loading ...
Loading ...
Loading ...
Your pressure washer requires some assembly and is ready
for use only after it has been properly serviced with the
recommended oil and fuel.
_fyou have any problemswith the assembly of your
pressurewasher, please call the pressurewasher helpline
at 1o860o222o3136.
UNPACK THE PRESSUREWASHER
1. Remove everything from carton except pressurewasher.
2. Opencarton completely by cutting each corner from top
to bottom.
3. Remove pressure washer from carton.
CABTON CONTENTS
Check all contents, if any parts are missing or damaged,carl
the pressure washer helplineat 1-800-222-3136.
, Main Unit
, Handle
, Accessory Tray with HoseWrap
, High PressureHose
, Spray Gun
, Nozzle Extensionwith Quick Connect Fitting
, Oil Pouch
, Bottle Bracket Wireform
, PerfectMixTMSiphoning Unit/Hose
, Parts Bag(which includes the following):
, Operator's Manual
, Owner's Registration Card
, Bagcontaining 4 Multi-Colored Quick Connect 8pray
Tips
, Handle FasteningHardware Kit (which includes):
, Handle Bolts (2)
° Carriage Bolt (1)
° Plastic Knobs for Handle(2_
° Plastic Knob (1)
o Tree Clips (4)
Becomefamiliar with each piece before assembling the
pressure washer, identify all contents with the illustration
on page6. if any parts are missing or damaged,call the
pressure washer helpline at 1-800-222-3136.
ASSEMgLINOPRESSUREWASHER
Your Craftsman pressurewasher will need assembly before
operation:
1. Fill out and send in registration card.
2. Attach handleand accessory tray.
3. Connectdetergent siphon hose to pump.
4. Add oil to engine crankcase.
5. Add fuelto fuel tank.
6. Connect pressure hose to spray gun and pump.
7. Connectwater supplyto pump.
8. Attach nozzleextension to spray gun.
9. Select/attachquick connect spray tip to nozzleextension.
Attach Handle and Accessory Tray
1. Place handle(A) onto handle supports connected to
main unit. Make sure hobs in handlealign with hobs on
handlesupports.
_iI
2. insert handle carriage bolts (B) through hobs from
inside of unit and attach a plastic knob (C) from outside
of unit. Tighten by hand.
NOTICE By loosening both knobs to the middle section of
the attachment bolt, the upper handle can fold forward to
store fiat atop the cold engine. DONOTfold the handledown
while the engine is hot.
3. insert rubber straps (B) through slots (E) in back of
accessorytray and pull tight from front.
Loading ...
Loading ...
Loading ...