Loading ...
Loading ...
Loading ...
| BEFORE CALLING FOR SERVICE (continued)
Bleach or softener dispensed
too soon.
Bleach or softener was added
directly to the wash load in the drum.
VVasher was not unloaded promptly.
Clothes were not properly sorted.
Dispenser compa_ment is overfilled causing
bleach or softener to dispense immediately.
Dispenser drawer closed too quickly causing
bleach or softener to dispense immediately.
Laundry chemicals must be loaded into the
dispenser.
Always remove items from the washer as soon
as possible after the cycle is complete.
Always wash dark colors separately from light
colors and whites to prevent discoloration.
Never wash heavily soiled items with lightly
soiled items.
Washer will not turn ON Power cord is not properly plugged in. Make sure that the plug is plugged securely into
a grounded, 3-prong, ]20-VAC, 60-Hz outlet.
House fuse is blown, circuit breaker
has tripped, or power outage has
occurred.
House fuse is blown, circuit breaker
has tripped, due to multiple
appliances on one outlet.
Reset circuit breaker or replace fuse. Do not
increase fuse capacity, if the problem is a circuit
overload, have it corrected by a qualified
electrician.
Reset circuit breaker or replace fuse. If more
than one appliance is connected to the outlet,
call an electrician to have an additional circuit
installed.
Door will not unlock Interior tempe_re of washer istoo high. The washer door has a safety feature to prevent
when cycle is stopped or personal injury. For example, if the washer is
paused during the hot wash stage of a sanitize
cycle, the interior temperature of the drum will
be very hot, so the door will not unlock. This
is normal. Allow the washer to cool until the
DOOR LOCI< indicator turns OFF on the display.
Water level in washer is too high. To drain the water_ press POV'/ER, then press the
SPIN SPEED button without selecting a cycle.
Wash c_.Je tlme is Io_ The washer a_omatically adjusts the This is normal. The washer adjusts cycle time auto-
than usual wash time for the amount of laundry, maticalty to provide optimal results for the selected
water pressure, water heating time and cycle. The time remaining shown in the display is only
other operating conditions, an estimate, Actual time may vary,
Music€or mildewy odor in incorrect or too much detergent has Use only High-Efficiency (HE) detergent in
washer been used. accordance with the manufacturer's instructions.
Inside of drum was not cleaned prop-
erly.
Washer not unloaded promptly.
Washer overloaded,
Hot and cold water inlet hoses are
reversed.
Run the CLEAN VCASHERo cycle regularly. Be
sure to wipe around and under the door seal
frequently. See Care and Cleaning of the Inte-
rior.
Clean around door seal/glass to prevent odor.
Always remove items from the washer as soon
as the cycle is complete.
When washing large loads, do not overstuff the
drum. The washer can be fully loaded, but the
drum should not be tightly packed and the door
should close easily.
Hot water rinse can set wrinkles in garments.
Check the inlet hose connections.
3O
Loading ...
Loading ...
Loading ...