Loading ...
Loading ...
Loading ...
WORKING
RC001
RADIO CONTROL
Radio control used for the remote operation of
ducted cooker hoods.
TECHNICAL DATA
- Alkaline battery powered: 12V mod. 27A
- Operating frequency: 433.92 Mhz
- Combinations: 32.768
- Max. consumption: 25 mA
- Operating temperature: -20 ÷ + 55 °C
- Dimensions: 130x45x15 mm.
OPERATING DESCRIPTION
The transmitter is equipped with 5 buttons for co-
oker hood management, as specied below:
: Light ON/OFF command.
: Motor ON (speed level 1) / OFF command.
: Reduce speed.
: Increase speed.
: 10-minute timer.
DIMMABLE LIGHTS FUNCTION
THISFUNCTIONPROVIDESFORLIGHTSDIM-
MABILITY,RANGINGFROM20%TO100%,BY
CONTINUOUSLY PRESSING THE LIGHT KEY
ONTHEREMOTECONTROL.
FUNCTIONSARETHEFOLLOWING:
- HOOD LIGHT OFF - SHORTLY PRESS THE
KEY-LIGHTONAT100%.
-LIGHTONAT100%-SHORTLYPRESSTHE
KEY-LIGHTOFF.
-LIGHTONAT100%-CONTINOUSLYPRESS
THEKEY-BRIGHTNESSREDUCTION.
- RELEASING THE KEY DURING REDUCTION
ORINCREASE-LIGHTKEEPSTHELUMINOUS
INTENSITYREACHED.
- LIGHT ON - DIMMED - CONTINOUSLY
PRESS THE KEY - BRIGHTNESS IS INVERTED
IFCOMPAREDTOTHEPREVIOUSFUNCTION.
INITIAL OPERATING CONDITION
The manufacturer supplies the radio control unit
ready to be used with codes preset in the Factory
OPERATION MODE
Standard conguration:
Standard conguration requires all “cooker hoods
– radio control - system” to be provided with the
same transmission code. In the event two cooker
hoods – radio control system are installed in the
same room or nearby, each system may affect
the operation of the another. Therefore, the code
of one radio control system must be changed.
Generating a new transmission code:
The radio control system is provided with preset
codes. Should new codes be required, proceed
as follows: Press simultaneously buttons:
for two seconds. When Leds light on, press but-
tons:
(within 5 seconds). Leds ashing 3 times indicate
the procedure is completed.
WARNING! This operation deletes permanen-
tly the preset codes.
Learning the new transmission code:
Once the transmission code is changed in the ra-
dio control unit, the electronic central unit of the
cooker hood must be made to set the new code
in the fol- lowing way:
Press the main power-off button (g. 14) of the
hood and then restore power to the electronic
control unit. Within the next 15 seconds, press
the Liight Button to synchronise the central
unit with the code.
Reset of the Factory conguration:
To restore the Factory conguration, follow the
procedure described below: press simultaneou-
sly buttons:
8
Loading ...
Loading ...
Loading ...