Loading ...
Loading ...
Loading ...
USES
SLT968 EM model can be used only if connected
with external motors manufactured by the same
producer.
SLT969 model are equipped with internal motor.
The use of materials which
can burst into ames should
be avoided in close proximity
of the appliance. When frying,
please pay particular attention
to re risk due to oil grease.
Being highly inammable, fri-
ed oil is especially dangerous.
Do not use uncovered electric
grills. In order to avoid possi-
ble re risk, all instructions for
grease lter cleaning and gre-
ase deposits removal should
be strictly followed.
6
FUNCTIONING
PANEL OPENING
It is possible to open the panel, which cover the
grease lters, slightly pulling the panel on a side,
as shown on g. 1.
In order to make the hood working properly, it is
recommended to install the appliance at a distan-
ce of 2000 - 2100 mm from the oor.
Before starting the appliance installation, please
check that all components are not damaged, in
such a case contact your retailer and do not carry
out installation.
Furthermore, please read carefully all of the fol-
lowing installation instructions.
- Use an exhausting pipe whose maximum length
does not exceed 5 meters.
- Limit the no. of elbows in the piping, since each
elbow reduces the air capacity of 1 linear meter.
(Ex.: if you use no. 2 x 90 ° elbows, the length of
piping must not exceed 3 meters).
- Avoid abrupt direction changes.
- Use a 150 mm constant diameter pipe for the
whole length, or same section.
- Use piping approved by standards in force.
Loading ...
Loading ...
Loading ...