Loading ...
Loading ...
Loading ...
EN
W415-1352 / A / 03.06.15
14
5.0 OPERATING INSTRUCTIONS
Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
NOTE: Ensure the house circuit breakers for the power supply are turned on. The power supply must
be 120 Volts/ 60Hz, 15 Amps.
The control panel is located on the left side of the appliance as illustrated.
The indicates ON / OFF. Push the to turn on the appliance and the fl ame effect.
5.1 MAIN POWER SWITCH & OPERATING CONTROLS
POWER
FLAME & EMBER
LIGHT
HEATER
DECORATIVE LIGHT
TIMER
DIGITAL DISPLAY
NOTE: Control panel
functions operate the
same as the remote
control.
POWER
Turns the appliance ON/OFF.
FLAME & EMBER LIGHT
CONTROL
HEATER LOCK
DECORATIVE LIGHT
HEATER CONTROL
TEMPERATURE SENSOR
TIMER
DIGITAL DISPLAY
Controls flame ON/OFF and the ember light colours which
cycle in the following sequence:
Orange / Blue / Purple / Cycle / Off
Heater button can be locked or unlocked by holding
for 5 seconds.
Turns the heater ON/OFF.
Adjusts heater to a desired temperature based on
environment. Hold for 5 seconds and wait for display to
flash. Cycle through the display value to select desired
temperature.
Push this button to select one of these decorative colour
options: Orange / Blue / Purple / Auto Cycle / Off
Timer can be programed to run appliance / heater for
specific lengths of time (1hr minimum to 9hrs maximum).
Digital display of appliance functions.
Hold 5
seconds
Hold 5
seconds
Display Value
Temperature
0123456789N
18 19
20 21 22 23 24 25 26 27
ON
64 66
68 70 72 74 76 78 80 82
ON
°
C
°
F
NOTE: When the heater is ON, the flames and embers
can not be turned OFF.
Remote Control:
Loading ...
Loading ...
Loading ...