Loading ...
Loading ...
Loading ...
g
Fully open the throttle.
u Engine RPMs will be limited by the set
value of “START MODE REV” The “START
MODE” pop-up information background
will change from orange to green and all
shift indicators will flash. To set the
“START MODE REV
”
(P.58) (P.68)
u Gradually engage the clutch.
u After engaging the clutch, Start Mode
controls the torque.
After the vehicle starts moving, it will
deactivate when any one of the following
conditions occurs:
● The transmission is shifted into 3rd gear.
● The RPMs reach the shift indicator limit
value in 1st gear. (P.58) (P.68)
● A lean angle greater than 20 degrees
occurs.
● The throttle is closed.
NOTICE
To prevent clutch damage, always wait at least 3
minutes between each Start Mode activation.
Operation Guide
116
Start Mode (Continued)
Pop-up information
Shift indicators
Loading ...
Loading ...
Loading ...