Loading ...
Loading ...
Loading ...
WARNING: Make certain that unit is disconnected
from power source before attempting to service or
remove any component.
CLEANING
• Keep machine and workshop clean. Do not allow
sawdust to accumulate on band saw.
• Keep wheels clean. Debris on wheels will cause
poor tracking and blade slippage.
• Keep mechanisms and threaded or sliding surfaces
clean and free of foreign particles.
• Operate band saw with a dust collector to minimize
clean up.
LUBRICATION
• The shielded ball bearings are permanently lubricat-
ed and require no further lubrication.
• Small amounts of machine oil can be applied to belt
tension mechanisms and threaded or sliding sur-
faces.
• Occasionally apply a coat of paste wax to table top
to keep it slick and corrosion free.
KEEP BAND SAW IN REPAIR
• If power cord is worn or cut in any way, have it
replaced.
• Replace any damaged or missing part.
• Use parts list to order parts.
Loading ...
Loading ...
Loading ...