Loading ...
Loading ...
Loading ...
For sufficient leveling and air circulating
in the lower rear section of the
appliance, the bottom feet may need
to be adjusted. You can adjust them
manually by hand or by using a suitable
spanner.
To allow the doors to self-close, tilt the
top backwards by 0.4" - 0.6"(10 -15mm)..
Leveling of appliance
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers. If you do not need to
remove the appliance doors, proceed
to ‘Installing Water Lines’ on page 9.
If you need to remove the doors,
continue below.
Door Removal
Tools you will need(Not provided)：
Adjustable
bottom feet
Front roller Rear roller
0.4" - 0.6"(10-15mm)
Adjustable
bottom feet
Allen Wrench (5/32", 4mm)
Philips Screwdriver
Wrench (5/16", 8mm)
Separate the two connectors on the left
side door. To remove the wire connector,
press the top of the connector (2) and
separate it from the other one. To remove
the water coupler from the hinge, twist and
2.
6
pull the clips from the coupler. Remove the
water line (3) while pressing the movable
part (4) of the water line coupler.
Clip
1. With the door closed, remove the 3 screws
holding the top cover (1) with Philips (+)
screwdriver, and then remove the top
cover with the entire harness attached.
Loading ...
Loading ...
Loading ...