Loading ...
Loading ...
Loading ...
Replacing the LED light
20
WARNING!
Do not use sharp objects to
remove frost from the freezer
compartment. Only after the
interior is completely dry should
the appliance be switched back
on and plugged back into the
main socket.
CAUTION!
Only after the door seals are
completely dry should the
appliance be powered on.
WARNING!
The LED light must be replaced
by a competent person. If the
LED light is damaged, follow the
steps below：
1. Unplug your appliance.
2. Remove the light cover by
lifting up and pulling out.
3. Hold the LED light with one
hand and pull it while pressing
the connector latch with the
other hand.
4. Replace the LED light and
snap it correctly in place and
replace the light cover.
Door seal cleaning
Take care to keep the door seals
clean. Sticky food and drinks can
cause seals to stick to the cabinet
and tear when you open the door.
Wash seal with a mild detergent
and warm water. Rinse and dry it
thoroughly after cleaning.
Loading ...
Loading ...
Loading ...