Loading ...
Loading ...
Loading ...
Page 5
This guide is for the installation of the motor used in the Isodrive systems after the canopy/rangehood or
bathroom extraction grill has been mounted on the wall or ceiling. (Refer to canopy/rangehood or bathroom
extraction unit installation manual).
NOTE: All PVC pipe and exi ducting measurements are referring to inside measurements, unless otherwise
mentioned.
Motor Features
• Universal mounting, all position with IPX4 degree of weather protection
• Patented anti water intrusion system.
• Acoustic dome with super quiet, long vane, backward curved centrifugal fan.
• Airow is dependant on installation and the ducting used.
• Using a single 150mm exi duct run you should attain 650m
3
/hr depending on the ducting installation.
• The use of a smaller 125 pipe would result in a loss of airow.
• Simple installation: - Mounts onto a 100mm PVC pipe for ultimate strength and allows for easy Dektite roof
sealing.
• Industrial quality motor and fan made in Germany and rated at 40,000 hours.
• Motor is a high eciency PSC type and rated at 62W, costing around the same as a 60W light globe to run.
• WARRANTY 10 YEARS return to manufacturer. Covers faulty manufacturing or components. It does not cover
normal wear and tear, chemical or storm damage, etc.
General Notes on Installation and Use
This fan unit is designed to be installed using 100mm PVC pipe as the initial connection duct to the fan module,
and is supplied with a 100mm PVC pipe to 150mm exible duct bell-mouth adaptor.
This fan is suitable for connection to multiple duct runs with a minimum inlet area of 11000 mm². Ducting runs
should be more than 2 metres away from the unit and no more than 4 - 5 metres (check with supplier if longer
duct length required). Flexible ducting must be extended suciently to present a smooth air passage with
bends of at least the radius of twice the diameter of the duct.
WARNING: The Isodrive motor system must not be ducted into a wall cavity or a ceiling space, where a build
up of grease can occur and become a potential re risk. This will void your warranty.
NOTE: Fan module and dual foil exi-duct are acoustically matched. Use of semi-rigid or rigid ducting will result
in increased noise and void warranty. See installation instruction notes ‘Why exi-duct’.
Recommended Installation Distance
For Isodrive 650 motor, a minimum of 3 metres (approx.) is recommended.
NOTE: Installation closer than these distances may result in higher air noise level. Maximum duct length 4 - 5
metres. Check with supplier if longer length is required. Do not reduce the duct size at any time and avoid sharp
bends.
2. Your Safety
Loading ...
Loading ...
Loading ...