Loading ...
Loading ...
Loading ...
CARE AND CLEANING
Wipe the microwave inside and outside with a soft cloth and a milddetergent solution, The rinse and wipe dry,
This should be done on a weekly basis--more often if needed. Never use rough powders or pads,_
REMOVABLE PARTS
• The following removable parts may be removed as desoibedo They should be washed in warm (not hot} water
with a mild detergent and a soft cloth. Once they are dean, rinse them weU and dry _th a soft cloth Never use
rough cleaning powders, steel wool or rough cleaning pads_
• Aftereachuseof thetemperature proberitmustbe removed from thesocket.Usepotholder, asthewire,plug
and sensorsections may be hot. Wipe food or liquid from the ser,.sorwith a soft damp cloth,
= Theglosstray may be removed forcleaning at the sink.Wipe up spi_overswith a paper towelor clothbefore
removalof thetray. Be carefulnot tochipor scratchthe edgesofthe tray asthismay causethe tray to break
dudrK3 use
* The oven insidetop (stirrer shield) canbe gentlywit_d inplaceorremovedforwashingat thesink. Excessive
oil spatters on the inside top (stirrer shield)will make them difficult to refllove,if left for many days.
Wipe them with a wet paper towel especiallyafter cookingchicker_or bacon°
The stirzer shield sets in slots alonf:the sides and in the rear of the oven and is held by three tabs in front. Pull
the front edgedown and forward to remove_Wash onlyin warm (Mothot) detergent water, rinse and wipe
dry. Avoid hitting or bending the metal st_'er blade, as this could cause uneven cooking ormicrowave power
loss. To replace shield,slide it into thesideand rear slots, and fit the front edgeof the shield with the three
tabs. After replacingit, make sure that it fitssecurely in place_
SPECIAL CARE
For best performance and safety, the inner door panel andthe ovenfront frame should be freeof foodor9_ease
buildup. Wipe both often with a mild detergent. Then rinse andwipe dry. Never use rough powders or pads.
After cleaning the control panel, touch CLEAR. This will clear any entries that might have been entered
accidentally whilecleaningthe panel
31
Loading ...
Loading ...
Loading ...