Loading ...
Loading ...
Loading ...
14 Cyclone Canopy Installation - English
CONTROL PANEL
Timer
Light
Fan Speed Levels
LED Screen
1. Turn the machine on at any speed
2. To activate the timer aer cooking, press the timer button
once. e screen light will begin ashing with a default of 3
minutes before turning o. To set the timer, press the lowest
fan speed setting to toggle the desired timer up to 9 minutes.
Note: e power setting that is being used prior to setting
the time delay will be the nal setting used when the time
delay option has been activated. Power settings cannot be
adjusted once the time delay option has been set.
3. Using the power level one button, set the time delay option in
minutes for the machine to automatically shut o by pressing
the button until the desired time is reached.
4. If you do not wish to activate the time delay option simply
press the timer button twice to shut machine o.
To Engage Time-Delay O Functions:
MAINTENANCE
• Always switch o power and unplug before cleaning and
maintenance.
• Mesh lters may discolour over time. Although product
is dishwasher friendly, depending on the amount of grease
and the type of dish-washing solutions used it may cause
the mesh lters to discolour faster.
WARNING
Surface and Filter Cleaning:
Clean with warm soapy water and a clean cloth. Do not use corrosive
or abrasive detergent or steel wool pads that can scratch the surface
of the machine.
Use non-abrasive stainless steel polish to bu out the luster and
grain. Scrub lightly.
e stainless steel lters trap residue and grease from cooking.
e lters should never have to be replaced but should be cleaned
thoroughly every 30 to 60 days depending on cooking habits.
Filters may be placed in the dishwasher on low heat or soaked in
warm, soapy water.
Spray degreasing detergent and leave to soak if heavily soiled.
Replacing Lightbulbs:
• Always switch o electrical supply before carrying out any
operation on the appliance.
• *Bulb & socket may change.
WARNING
is range hood requires LED bulbs. (1.5W maximum per bulb)
To change the light bulb, remove light case from the light socket.
e light case can be accessed from the inside of the body of the
machine.
1. Disconnect the connecting wires of the light socket from the
motherboard wires.
2. Remove grease lters and push light case outward away from
the machine.
3. Replace with a new case.
For a complete description of our maintenance and operating instructions you may visit us online at
www.CycloneRangeHoods.com to download your model’s Use and Care Guide.
Due to the fact that we are always striving to improve our products and take advantage of advances in technology there may
be slight variations in your product.
Loading ...