Whirlpool YMT4070SKQ0 microwave

User Manual - Page 11

For YMT4070SKQ0.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Youcanstoptheovenduringa cyclebyopeningthe
door.Theovenstopsheatingandthefanstops,butthe
lightstayson.Torestartcooking,closethedoorand
TouchSTART/ENTER.
Ifyoudo notwantto continuecooking:
Closethedoorandthelightgoesoff.
OR
TouchOFF/CANCEL.
NOTE:Beforesettingafunction,touchOFF/CANCEL
to makesurenootherfunctionis on.
TheChildLocklocksthecontrolpanelpadsto
preventunintendeduseofthemicrowave.
Tolockthecontrolpanel:
TouchandholdSTART/ENTERuntil"L" appearson
display(approximately4 seconds).
(Twotoneswillsound.)
Tounlockthecontrolpanel:
TouchandholdSTART/ENTERuntil"L" appearson
display.(Onetonewillsound.)
SiZE COLO. KITMODE"NO.
24" (61 cm) Black MK1074XHB
24" (61 cm) White M K1074XHQ
NOTE: You can also fasten your microwave oven
under a cabinet by using a special kit. You can get
Kit No. 4359914 from your dealer. If your dealer does
not stock the kit, you can order it, by kit part number,
by calling 1=800-461 =5681 and following the instructions
and telephone prompts you hear.
When you first plug in your microwave oven, the
display shows " 0 ". If the electric power ever goes
off, the display will again show " 0 " when the power
comes back on.
NOTE: You can cook without setting the clock, but the
display will not show the correct time of day after the
cooking is completed.
1. Touch CLOCK SET.
2. Touch number pads for time of day.
For example: For 7:00, touch "7 0 0"
3. Touch CLOCK SET.
Fire Hazard
Do not install oven next to or over a heat
source without a UL approved (CSA approved
in Canada) trim kit.
Doing so can result in death, fire, or
electrical shock.
You can build your microwave oven into a wall or
cabinet by using one of the following trim kits.
These kits are available from your dealer. If your
dealer does not stock the kit you can order it, by kit
part number, by calling 1-800=461=5681 and
following the instructions and telephone prompts
you hear.
11
Loading ...
Loading ...
Loading ...