Loading ...
Loading ...
Loading ...
8.1 DATA HOLD
During the measurement, press the ‘HOLD’ function button, the data will be held on the
display and a ‘H’ symbol will appear. Press the ‘HOLD’ function button to return to normal
measurement mode.
8.2 SWITCHING FREQUENCY OR DUTY
1. During the voltage or current ranges, press the “Hz/Hz/ %”button to switch between,
frequency of the voltage or current. Press the “Hz/Hz/ %”button twice, the Meter will
change to duty range for measuring the duty cycle of the voltage or current.
2. Press “Hz/Hz/ %”button again, the Meter will change back to voltage or current
measuring.
8.3 PEAK MEASUREMENT
1. Press the "PEAK HOLD" key to enter the manual range mode, display the Peak Max
value; then press this key twice to display the Peak Min value; then press to display
the difference between Peak Max-Peak Min. Press "PEAK HOLD" key for more than 2
seconds to exit this mode.
2. After entering the Peak Max mode, the maximum value of the measurement is
automatically saved.
3. After entering the Peak Min mode, the minimum value of the measurement is
automatically saved.
4. After entering the Peak Max-Peak Min mode, the measured difference is automatically
saved
5. Press "PEAK HOLD" key for more than 2 seconds to exit this mode, the Meter will
return to normal measurement state.
8.4 SWITCHING FUNCTIONS
1. In the resistance range, press the "SEL" key, to switch between resistance, diode,
continuity, capacitance ranges.
2. In the voltage range, press the "SEL" key, to switch between the DC and AC.
3. In the temperature range, press the "SEL" key, to switch between degrees Celsius and
Fahrenheit.
8.5 RELATIVE INRUSH MEASUREMENT
Press "REL/INRUSH" function button, the meter enters the relative value measurement
mode, and the auto range mode is switched off. If the "REL/INRUSH" button is pressed
again, the meter will return to auto range.
8. OPERATING INSTRUCTIONS
14
Loading ...
Loading ...
Loading ...