Loading ...
Loading ...
Loading ...
9
DOWNROD-STYLE FAN MOUNTING
5.
6.
Twist canopy cover until the two small protrusions
on the inner lip of the canopy cover align with the
notches on the bottom of the canopy (C). Remove
preassembled canopy cover from bottom of
canopy (C).
NOTE: The downrod (A), yoke cover (D) and
canopy cover are not used in this type of
installation.
CLOSEMOUNT-STYLE FAN MOUNTING
1.
If you cut back the lead wires in Step 4, strip 1/2 in.
of insulation from end of of each wire -- white,
black, green and blue (if applicable). Twist stripped
ends of each strand of wire within the insulation
with pliers (not included).
Install hanging ball of downrod (A) into opening of
mounting bracket (B). Align the slot in hanging ball
with the tab in mounting bracket (B).
DANGER: Failure to align slot in hanging ball
with the tab in mounting bracket (B) may result in
serious injury or death.
Continue to WIRING on page 11.
Canopy
Cover
B
1
C
Tab
5
B
6
A
Slot
Loading ...
Loading ...
Loading ...