Loading ...
Loading ...
Loading ...
Load diy items loosely, spacing
evenly around agitator, and close
the lid.
A typical wash load: two twin sheets,
two tablecloths, four collared
shirts, three pillow cases, three
small bath towels, three t-shirts,
and three pairs of shorts.
Place large items in bottom, small
items in the middle and medium
items on top.
When loading wet items make
sure you set the load/water level
high enough to allow the items to
move freely.
Wash bulky items like blankets
separately.
To add items after washer has
started, push in Cycle knob and
submerge additional items next to
the agitator. Close the lid and pull
Cycle knob out to restart.
To reduce wrinkling, give
permanent press items, synthetics
and poly knits room to move freely
in the washer.
NOTE:
* Do not wrap large items like sheets
around the agitator.
* Do not wash fabrics containing
flammable materials (waxes, clean-
ing fluids, etc.) in your washer.
Care & Cleaning
Leave the lid ()pen after washing
to allow moisture to evaporate. Tile
wash basket is practically (:are free.
If you want to clean the washer use
a clean soft cloth dampened with
liquid detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Fill Hoses--Hoses connecting
washer to faucet should be replaced
every five years.
Moving and Storage--Ask tile service
technician to remove water from
drain pump and hoses. Contact
your local distributor for informa-
tion on how to keep the tub station-
aiy when moving the washer.
Long Vacations--Be sure water
supply is shut off at taps. Drain all
water from hoses if weather will be
below freezing.
9
Loading ...
Loading ...
Loading ...