Loading ...
Loading ...
Loading ...
Problem
Possible Causes
What to Do
Fill hoses or drain hose is
improperly connected
Make sure hose connections are tight at taps
and make sure end of drain hose is correctly
inserted in and secured to drain facility.
Household drain may * Check household plumbing. You may need
be clogged to call a plumber.
Constant water pressure to the * Tighten hoses at the taps and turn the water
fill hoses at the water source off after each use.
* Check condition of the fill hoses; they may
need replacement after 5 years.
Washer is uneven
Washer load is unbalanced
Shipping rod has not been
removed
Water is draining
Make sure washer is level and firm
to the floor.
Push the Cycle knob in to stop the
washer, open the lid and redistribute
the load evenly. Close the lid and restart.
Remove the shipping rod on the bottom
right side of the washer.just before sliding
the washer in place. Do not use the washer
with the shipping rod in place.
There will be a gurgling, "sucking" sound
prior to the spin cycle. This is normal and
will stop as soon as the machine goes into
the spin cycle.
The washer normally pauses
between washing steps
Incorrect cycle
selected
• Make sure the cycle selected matches the
load you are washing.
This is normal for some fabrics
/2
Loading ...
Loading ...
Loading ...