EW36GC55PB1 User Manual

Loading ...

Care and Cleaning

Your appliance is shipped with the burner heads

andburnercapsinthecorrectlocations.Before

using your gas appliance be sure to:

●Followinstallationinstructionsbeforeoperating.

●Removeallpackingtapefromcooktoparea.

Cleaning cooktop, grates, caps and burner heads

Cleaning the grates

The burner grates are dishwasher safe and may be

cleaned in the dishwasher. Remove any excessive

soils before placing in the dishwasher.

IMPORTANT

●Forpropergasowandignitionoftheburners

— DO NOT allow spills, food, cleaning

agents or any other material to enter the gas

oriceopening.

●Thecooktopisnotremovable.Donotattempt

to remove or lift the cooktop.

IMPORTANT

When placing the burner caps on the cooktop, be

sure the burner caps are seated firmly on top of

burnerheads.Improperflamesizeanduneven

heating may result when any surface burners are

turnedONandtheburnercapsarenotseated

correctly.

●To avoid possible burns use care when

cleaning the cooktop. DO NOT attempt to clean

the cooktop whenever the cooktop or burner

heads are still hot.

●To avoid possible burns DO NOT attempt any

of the following cleaning instructions provided

beforeturningOFFallofthesurfaceburners

and allow them to cool.

●To avoid possible burns DO NOT attempt to

operate the surface burners without the burner

caps.

Caps

Should you ever need to remove the burner caps

for cleaning lift the burner cap off the burner

head. Clean heavy soils with an absorbent cloth.

Rinse with a clean, damp cloth and immediately

thoroughly dry including the bottom and inside

ofthecap.Donotuseharshabrasivecleaners.

Theycanscratchtheporcelainonthecap.Donot

clean burner caps in dishwasher. When placing the

burner caps, see Important note below.

Burnerheads

Lifttheburnercapfromtheburnerhead.The

surface burner heads are secured to the cooktop

and must be cleaned in place.

Forpropergasowitmaybenecessarytoclean

theburnerheadsandslots.Toclean,rstusea

cleanDAMPclothtosoakupanyspills.Remove

any food from between the burner slots using a

small nonabrasive brush like a toothbrush and

afterwards wipe using a damp cloth. For stubborn

soils located in the slots, use a small-gauge wire or

needle to clean.

Should you experience ignition problems it may be

that an ignition port hole is partially blocked with

soil(seegurebelow).Withtheburnerheadin

place, use a small wire gauge needle or the end of

a paper clip to clear the ignition port or ports.

Slots

Ignition port

Oriceport

Loading ...

User Manual - Page 12