Loading ...
Loading ...
Loading ...
OPTION ADJUSTMENT MODE
After using the DishDrawer, you may want to change some of the preset options to suit
your needs. You can change the following settings:
• RinseAgent
• Auto Powf, r
• Wate_ Pressure
To make these changes it is necessary to enter into the Option Adjustment Mode
To Enter the Option Adjustment Mode
• Presstilt, Power button to turn tilt, DishDrawer on.
• Pressand hold the Program and Ere .Savebutton simuhaneously for five seconds.
• When the buttons have been pressed correctly the DishDrawer will give one long
beep.
• Release the two buttons. Use the buttons on the primary and secondary control
panel to make your changes to the pre set options. Fheseam explained below.
• PressPower to return to the Normal mode. Your DishDrawer will save these
changes automatically.
• To make ff_rther changes repeat the above steps.
Rinse Agent Setting
• Enter the Option Adjustment Mode as t,xplained abow,.
• The current rinse agent setting is shown on the secondary control panel in orange
lights.
• Press the Program button to advance the setting. The options art, from one to five.
Forexample two orange lights indicate the rinse agent setting is set at two. Select
the setting you require.
• Press Powerbutton to return to the Normal mode.
2O
Loading ...
Loading ...
Loading ...