D-Link M32-2, M32-3 User Manual

Loading ...

74D-Link M32 User Manual

Section 3 - Conguration

Firewall Settings - IPv4/IPv6 Rules

Name: Enter a name for the rule.

Source IP Address

Range:

Enter the source IP address range (e.g. 1.1.1.1-1.1.1.2 for IPv4

or 2001::1-2001::2 for IPv6) that the rule will apply to, and using

the drop-down menu, specify whether it is a WAN or LAN IP

address. Both a single IP address and a range of IP addresses

can be entered.

Destination IP

Address Range:

Enter the destination IP address range (e.g. 1.1.1.1-1.1.1.2

for IPv4 or 2001::1-2001::2 for IPv6) that the rule will apply to, and

using the drop-down menu, specify whether it is a WAN or LAN

IP address. Both a single IP address and a range of IP addresses

can be entered.

Protocol & Port

Range:

Select the protocol of the trac to allow or deny (Any, TCP, or

UDP) and then enter the range of ports (e.g. 21-23) that the rule

will apply to. Select Any to allow/deny all types of trac

regardless of the port number.

Schedule: Use the drop-down menu to select the time schedule that the rule

will be enabled on. The schedule may be set to Always Enable,

or you can create your own schedules in the Schedule section.

Refer to Refer to Time & Schedule - Schedule on page 84 for

more information.

Click Apply when you are done.

To create a new rule, click the Add Rule button. Click Save when you are done. A maximum of 24 rules can be dened. If you

edit or create a rule, the following options will appear:

Loading ...

D-Link M32-2, M32-3 EAGLE PRO AI AX3200 Mesh System