Loading ...
Loading ...
Loading ...
63D-Link M32 User Manual
Section 3 - Conguration
Status: Enable or disable the DHCP server.
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP
server’s IP assignment.
Note: If you have reserved static IP addresses to client devices,
make sure the IP addresses are outside of this range or you might
have an IP conict.
DHCP Lease Time: Enter the length of time for the IP address lease in minutes.
The default is 10,800 minutes.
Always Broadcast: Enable this feature to broadcast your network's DHCP server
to LAN/WLAN clients.
WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps,
100 Mbps, 1000 Mbps, or Auto (recommended).
UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP
provides compatibility with networking equipment, software,
and peripherals. This is enabled by default.
IPv4 Multicast
Streams:
Enable to allow IPv4 multicast trac to pass through the router
from the Internet. This is enabled by default.
IPv6 Multicast
Streams:
Enable to allow IPv6 multicast trac to pass through the router
from the Internet. This is enabled by default.
Network
DHCP Server
Advanced Settings...
Loading ...
Loading ...
Loading ...