Loading ...
Loading ...
Loading ...
Cleaning and care
59
Cleaning the filter insert (in the
toe-kick)
The surface of the filter in the filter
insert is visible after removing the lint
filter in the toe-kick. This filter surface
must only be cleaned if there is a visible
accumulation of lint.
Carefully vacuum up any visible lint or
soiling. Use a dusting brush or the
narrow crevice nozzle.
If there are visible blockages or other
residues after cleaning: Remove the
filter insert and clean it under running
water. If stubborn residues are not
removed, these can lead to faults
over time.
Removing the filter insert
If the filter insert is clogged up and
soiled, it must be removed and cleaned
under running water.
Use the handle to pull out the filter
insert at an angle
forward and to the
right.
Then pull the filter insert out at an
angle.
Rinse the filter surface of the insert
under warm running water.
Wet lint filters could cause
operational faults while drying.
Shake the filter insert thoroughly and
then dry it carefully.
Loading ...
Loading ...
Loading ...