WTH9506 User Manual

Loading ...

leaning and Maintenance

Care and Maintenance

When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the

filter in the inlet valve occasionally.

(The power cord and water tap diagrams may vary according to the country)

To Clean the Filter in the Inlet Valve

Cold water washing

Close the tap before turning on the power.

Select both HOT/COLD and then press the

[START/PAUSE] button to briefly start a

wash in order to completely remove all

water pressure from the hoses.

• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular

intervals e.g. every 5th wash should be at least a WARM one.

When you have finished

• Turn off taps to prevent the chance of flooding should a hose burst.

• Always unplug the power cord after use.

After removing the water supply

hose pull out the filter.

Then use a brush to clean the filter.

Turn off the power before

pulling out the cord.

Replace the filter after cleaning it.

1 2

3 4

NOTE

• Before cleaning the filter, the impurities in the water supply hose should be removed.

NOTE

• Check if water leaks after reassembling. (The Rubber ring must remain in the cap)

To Clean the Pump casing (for pump model)

Place a towel or a

shallow pan on the

floor under the drain

pump cap. Excess

water may flow out.

Remove any foreign

objects and fluff inside

pump casing and from the

filter.

Replace the cap. Insert the filter along

the guide ribs inside the pump casing.

Filter must face the guide ribs inside

pump casing and securely turn the cap

clockwise.

1 2 3 4

Turn the cap

counter-

clockwise and

pull it out.

Filter

Cap

Guide rib

Filter

Without multi clean filter,laundry may get damaged.

How to clean Multi clean Filter

Push the upper part of multi-

clean filter down and pull

forward.

Open the lid and remove lint and

then wash out.

Close the lid and then insert the lower

part of the filter into the wash tub and

press down then press top part into

position until you hear a click sound.

1 2 3

Loading ...

User Manual - Page 33