Loading ...
Loading ...
Loading ...
27
Installation
63.2cm
102cm
132cm
2cm 67cm 10cm2cm
Caution
• If the appliance is supplied from an extension cord or multi-outlet power board the extension
cord or multi-outlet power board should be positoined so it is not subject
to splashing of water or moisture ingress.
2
Checking level
• Open the lid and check if the washer is correctly
leveled by refering to the level indicator.
5
Confirming level
• Place the washer to original position and
confirm the level as in figure 2. (Try to shake the
washer and confirm the level.)
• Check the location of the
level in the front of washer.
3
Checking slope
• Check if installation surface is tilted.
(Try to shake the washer and check if the
washer is firmly installed.)
6
Distance between drain hose at the rear and
the wall
• Distance between drain hose and the wall should
be more than 10cm, and the distance between
the wall and the sides of the washer should be
more than 2cm.
How to use the rubber adjusting plates
• Use the adjusting plates to level the washer when the
adjustable legs cannot cover the gap.
Loading ...
Loading ...
Loading ...