Loading ...
Loading ...
Loading ...
USING THE DOOR CONTROL - MODEL
CMXEOCG472
SYNCHRONIZE THE DOOR CONTROL
To synchronize the door control to the garage door opener, press the
push bar until the garage door opener activates (it may take up to 3
presses). Test the door control by pressing the push bar, each press
of the push bar will activate the garage door opener.
USING THE DOOR CONTROL
LOCK
Button
LEARN
Button
LIGHT
Button
NOTE: If the command LED is
continuously blinking, the Lock
feature needs to be deactivated.
Command LED
Push Bar
PUSH BAR
Press the push bar to open or close the door.
LOCK
The LOCK feature is designed to prevent activation of the garage
door opener from remote controls while still allowing activation from
the door control and wireless keypad. This feature is useful for added
peace of mind when the home is empty (i.e. vacation).
Activate:
Press and hold the LOCK button for 2 seconds. The
command LED will flash as long as the lock feature is activated and
your hand held remote control will not operate your door at this time.
Deactivate:
Press and hold the LOCK button again for 2 seconds.
The command LED will stop flashing and normal operation will
resume.
LEARN A DEVICE
Any compatible remote controls, wireless keypads, or myQ
®
accessories can be programmed to the garage door opener by
pressing the Learn button on the Dual-Function Control Panel.
LIGHT
Press the LIGHT button to turn the garage door opener lights on or
off. When the lights are turned on they will stay on until the LIGHT
button is pressed again, or until the garage door opener is activated.
Once the garage door opener is activated the lights will turn off after
the specified period of time (the factory setting is 4-1/2 minutes). The
LIGHT button will not control the lights when the door is in motion.
To change the amount of time the garage door opener lights will
stay on:
Press and hold the LOCK button until the garage door opener lights
flash.* The time interval is indicated by the number of flashes.
NUMBER OF TIMES GARAGE
DOOR OPENER LIGHTS FLASH
TIME THE GARAGE DOOR
OPENER LIGHT STAYS ON
1 1 ½ Minutes
2 2 ½ Minutes
3 3 ½ Minutes
4 4 ½ Minutes
To cycle through the time intervals repeat the step above.
35
Loading ...
Loading ...
Loading ...