Loading ...
Loading ...
Loading ...
1 - PROGRAM THE TRAVEL
Without a properly installed safety reversal system, persons
(particularly small children) could be SERIOUSLY INJURED or
KILLED by a closing garage door.
•
Incorrect adjustment of garage door travel limits will interfere
with proper operation of safety reversal system.
•
After ANY adjustments are made, the safety reversal system
MUST be tested. Door MUST reverse on contact with 1-1/2"
(3.8 cm) high object (or 2x4 laid flat) on floor.
Note: While programming the travel, the UP and DOWN buttons can
be used to move the door as needed. During the Automatic Force
Setup, the door will automatically open and close.
1 Press and
hold the
Adjustment
Button until
the UP
Button
begins to flash and/or a beep is
heard. The Safety Reversing
Sensors will be disconnected
during the Program the Travel
process.
2
Press
and
hold
the UP Button until the door is in
the desired UP position.
3 Once the
door is in the
desired UP
position
press and
release the
Adjustment Button. The garage
door opener lights will flash
twice and the DOWN Button will
begin to flash.
4 Press
and
hold
the
DOWN
button until the door is in the
desired DOWN position.
5 Once the
door is in the
desired DOWN
position press
and release the
Adjustment
Button. The garage door opener
lights will flash twice. Program
the Travel is now complete.
If the garage door opener lights
flash 5 times, then
programming has timed out and
the Travel Limits have not been
set. Please restart the Program
the Travel process.
2 - AUTOMATIC FORCE SET UP
Once both the up and down positions have been manually set, the
Safety Reversing Sensors will reconnect and become operational.
Then, the opener will enter a force-sensing operation by automatically
moving the door open and close. The garage door opener will sound
an audible and visual alert before automatically opening and closing
the door. The garage door opener will beep three times, confirming
that the Automatic Force Setup completed successfully. Adjustment
is complete.
If you hear one long beep after the door attempts to move, then the
Automatic Force Set Up has not completed successfully. Please start
over at step 1 of Program the Travel.
30
Loading ...
Loading ...
Loading ...