Loading ...
Loading ...
Loading ...
5
PORTABLE LP CONNECTION
One of the many features of the TWIN EAGLES grill base is the pullout slide pan for easy access to the
LP gas tank.
1) To install the gas cylinder, pull out the slide pan and place the cylinder onto the pan.
2) Tighten the tank holding screw to secure the gas cylinder in place.
3) Check to ensure that the tank’s gas valve on top of the cylinder is closed.
4) Connect the LP regulator (included) to the cylinder and hand-tighten only. Open the tank
valve and make sure all connections are leak tight using a soapy water solution.
(Reference page 7 for leak test procedure).
WARNING
• DO NOT STORE SPARE LP-GAS CYLINDER
UNDER OR NEAR THIS APPLIANCE.
• NEVER FILL THE CYLINDER BEYOND 80
PERCENT FULL.
• FAILURE TO DO SO A FIRE CAUSING DEATH
OR SERIOUS INJURY MAY OCCUR.
• NOTE: use only a 20-lbs (5 gallon capacity) gas cylinder,
• WARNING: DO NOT USE A DENTED OR RUSTED LP CYLINDER
• NEVER USE A CYLINDER WITH A DAMAGED VALVE.
• ALWAYS CHECK FOR LEAKS AFTER CHANGING THE LP CYLINDER.
• THE LP PRESSURE REGULATOR AND HOSE SUPPLIED WITH THIS UNIT MUST BE USED
WITHOUT ALTERATION.
CAUTION: USE EASY PULL. Use the slot at the front of the pan to push in or pull out the gas cylinder.
Do not place hand on top of the gas cylinder when pushing in or pulling out the slide pan.
Easy Pull
Tank Holding Screw
Loading ...
Loading ...
Loading ...