Loading ...
Loading ...
Loading ...
4
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(1) Pliers
(2) 7/16" Open or Box End Wrenches
1
32
37
41
12
36
22
5
4
STEP 1: (SEE FIGURE 1)
• Insert a plug (37) in to the end of the hitch tube (12).
• Install the hitch pin (41) in the hitch bracket and hitch
tube and secure it with the hairpin cotter (36).
• Attach the hitch support tubes (4) and (5) to the
hitch tube using one 1/4” x 2” hex bolt (22) and 1/4”
nylock nut (32). Do not tighten completely.
2
38
37
37
38
6
6
STEP 2: (SEE FIGURE 2)
• Insert plugs (37) into the ends of the hopper suport
tubes (6).
• Insert hex ange bearings (38) into the holes in the
hopper support tubes (6) as shown below.
3
6
22
6
26
26
22
32
32
11
STEP 3: (SEE FIGURE 3)
• Assemble the axle/gear assembly (11) and hopper
support tubes (6) to the hitch support tubes as
shown using two 1/4” x 2” hex bolts (22), spacers
(26), and 1/4” nylock nuts (32). Do not tighten
completely.
4
STEP 4: (SEE FIGURE 4)
• Slide the cross brace (7) onto the spreader shaft.
• Insert the bushing (40) into the cross brace (7).
• Attach the cross brace to the hopper support tubes
using two 1/4” x 2-1/2” hex bolts (21) and 1/4” nylock
nuts (32). Do not tighten completely.
21
7
32
21
40
32
Loading ...
Loading ...
Loading ...