User Manual Liebherr SBSEF7242 Side by Side Fridge

• User Manual - (English)

• SBSEF7242 - Liebherr - Specifications Sheet - (English)

• Dimensional drawing - (English)

• Operation Instructions - (English)

Table of contents

• User Guide for Liebherr SBSEF7242 
• Table of Contents

User Guide for Liebherr SBSEF7242

Table of Contents

• Appliance at a glance
• Description of appliance and equipment
• Appliance range of use
• Conformity
• EPREL database
• External dimensions of the appliance
• Saving energy
• General safety information
• Controls and displays
• Operating and control elements
• Temperature display
• Putting into operation
• Transporting the appliance
• Installing the appliance
• Changing over the door hinges
• Sliding into the row of units
• Disposing of packaging
• Connecting the appliance
• Switching on the appliance
• Control
• Brightness of the temperature display
• Child proofing
• Door alarm
• Temperature alarm
• Freezing food
• Thawing food
• Setting the temperature
• SuperFrost
• Drawers
• Shelves
• VarioSpace
• Drawer for herbs and berries
• Freezer pack
• Maintenance
• Defrosting with NoFrost
• Cleaning the appliance
• Customer service
• Malfunctions
• Decommissioning
• Switching off the appliance
• Taking the appliance out of service
• Disposal
• Preparing appliance for disposal
• Disposing of the appliance in an environmentally friendly manner

Switching on the appliance

Note The manufacturer recommends:

• Store frozen produce at -18 °C or colder.

Switch on the appliance approx. 2 hours before loading for the first time.

• Press On/Off button Fig. 3 (7).
• The temperature display and the alarm symbol flash until the temperature is sufficiently low. If the temperature is above 0 °C, dashes flash. If it is below, the current temperature flashes.
• To cool the interior as quickly as possible when the appliance is first put into operation, the appliance runs at a high rate, i.e. compressor runs at higher speeds. Therefore the noise level is a little higher for a short time. Afterwards the appliance continues to operate quietly in the energy-saving, normal mode.
• If “DEMO” is displayed, demo mode is activated. Please contact the after sales service.

Control

Brightness of the temperature display

You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. The function works with the door closed and is not relevant for appliances with a concealed screen.

Adjusting the brightness

The brightness is adjustable between h0 (no illumination) and h5 (maximum luminosity).

• To activate the setting mode: press the SuperFrost button Fig. 3 (8) for about 5 s.
• The display indicates c.
• The menu symbol Fig. 3 (3) shines.
• Using the Up setting button Fig. 3 (1) or Down setting button, Fig. 3 (2), select h.
• To confirm: briefly press the SuperFrost button Fig. 3 (8).
• To make the display brighter: press Up button
• To make the display darker: press Down button
• To confirm: press SuperFrost button Fig. 3 (8).
• The brightness is adjusted to the new value.
• To deactivate the set-up mode: press On/Off button
• Wait for 5 minutes.
• The temperature is indicated again in the temperature display

Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

Setting the child lock function

• To activate the setting mode: press SuperFrost button Fig. 3 (8) for about 5 s.
• c flashes on the display. w
• The menu symbol Fig. 3 (3) shines. u
• Briefly press the SuperFrost button Fig. 3 (8).to confirm.

When c1 is indicated in the display:

• Tto activate the child lock, briefly press the SuperFrost button Fig. 3 (8).
• The child lock symbol Fig. 3 (11) shines.
• c flashes in the display.

When c0 is indicated in the display:

• to deactivate the child lock, briefly press the SuperFrost button Fig. 3 (8).
• The child lock symbol Fig. 3 (11) goes out.
• c flashes in the display.
• To deactivate the set-up mode: press On/Off button Fig. 3 (7)
• Wait for 5 minutes.
• The temperature is indicated again in the temperature display.

Door alarm

An audible warning sounds if the door is open for longer than 60 seconds. The audible warning stops automatically when the door is closed.

Muting the door alarm

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open.

• Press alarm button Fig. 3 (9).
• The door alarm is silenced.

Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough. The temperature display and the alarm symbol Fig. 3 (4) flash at the same time. The cause of the temperature being too high may be:

- warm fresh food was placed inside

- too much warm ambient air flowed in when rearranging and removing food

- Prolonged power outage

- the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol Fig. 3 (4) goes out and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see 7 Malfunctions) .

Note Food may be spoilt if the temperature is not cold enough. u Check the quality of the food. Do not consume spoiled food.

Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

• Press alarm button Fig. 3 (9).
• The audible alarm is silenced.

Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see 1 Appliance at a glance) under “Freezing capacity ... kg/24h”. Each drawer can hold a max. of 25 kg of frozen food. The shelves can each be loaded with 35 kg of frozen food. If the door cannot be opened right after having been closed, due to vacuum, please wait about 2 minutes until pressure returns to normal.