Loading ...
Loading ...
Loading ...
Use outdoor antenna if FM/AM radio reception is poor. AM outdoor antenna
• Disconnect the antenna when the unit is not in use. [Using a vinyl wire (not included)]
• Do not use the outdoor antenna during an electrical storm. Run a piece of vinyl wire horizontally across a
window or other convenient location.
FM outdoor antenna / r
[Using a TV antenna (not included)] / I I AMANT
/• The antenna should be installed by a _ ................ L. -i .... _.'.,_
- o-_.-J-_ competent technician I_-_-I _ __EXT
o_-_._ " 5.0 m to 12 m IJJ _,_ __LOOP
(16 ft to 39 ft) LJJl _-'
m-_-- 75 r2 coaxial cable _ Leave the AM loop _ I _FMANT
_(not included) antenna connected.
1
Rework your outdoor antenna's 75 _2coaxial cable as follows.
($) Remove a piece of the outer (_ Carefully pull the tabs apart (_) Install the coaxial cable,
vinyl insulator, to remove the cover. Clamp the cable conductor, and
wind it on so that it does not
contact anything else.
10 mm Peel(W3d')back __
10 mm (WJ') @
$
7 mm (%d') Clamp with pliers
j Main unit
@ Attach the cover.
_AC cord connection
AC power supply cord
(included)
Main unit
Conserving power
The main unit consumes a small amount of power when it is turned off
(main unit: approx. 0.3 W). To save power when it is not to be used for a
long time, unplug it from the household AC outlet,
You will need to reset some memory items after plugging in the main
unit.
The included AC power supply cord is for use with the main unit only,
Do not use it with other equipment. Also, do not use cords for other
equipment with the main unit,
Preparing the remote control
• Batteries
Insert so the poles (+ and ) match those in the remote control,
R6/LR6,AA
ICAUTION I
Danger of explosionifbatteryisincorrectlyreplaced.Replace only I
withthe same or equivalenttype recommended by the manufacturer. I
Dispose of used batteries according to the manufacturer's instructions. I
• Do not heat or expose to flame,
• Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not:
• mix old and new batteries,
• use different types at the same time,
• take apart or short circuit,
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place,
• Use
Aim at the remote control signal sensor (4 13), avoiding obstacles,
at a maximum range of 7 m (23 ft) directly in front of the unit.
Loading ...
Loading ...
Loading ...