Loading ...
Loading ...
Loading ...
_ Assembling the speakers
Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it,
• For assembly, use a Phillips-head screwdriver.
• For optional wall mount, refer to page 6.
: Front speakers
iii
Pipe
Thread the
cable throu(
the base.
Join the pipes.
Cable
Tighten securely.
Small
_ screws
Match these holes when
you insert the pipe.
Slide into the groove.
@
Tighten
securely.
Screws
Phillips-head
screwdriver
(not included)
Pull and press the
cable into the groove.
Cable
Speaker
Tighten securely.
O
Screws
Insertthe wire _1
fully.
÷ : White
: Blue Push!
_ Press into
the groove.
• Preventing the speakers from falling
• You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
• Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
e.g. PT754 Front speakers
String (net included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Approx,
Screw eye Wall 150 mm
(not included) (52%/')
Loading ...
Loading ...
Loading ...