Loading ...
Loading ...
Loading ...
14 | USING THE STAND MIXER
USING THE STAND MIXER
3
Insert attachment shaft housing into
attachment hub, making certain that
attachment power shaft fits into
square attachment hub socket� It may
be necessary to rotate attachment
back and forth� When attachment
is in proper position, the pin on the
attachment will fit into the notch
on the hub rim�
4
Tighten attachment knob by turning
clockwise until attachment is
completely secured to Stand Mixer�
Plug into proper electrical outlet�
5
To remove: Turn speed control
to “0”� Unplug Stand Mixer�
6
Loosen attachment knob by
turning it counterclockwise� Rotate
attachment slightly back and forth
while pulling out�
7
Replace attachment hub cover�
Tighten attachment knob by turning
it clockwise�
NOTE: See the Use and Care Guide of each specific attachment for recommended
speed settings and operating times�
Book.indb 14 5/4/2018 7:24:27 PM
Loading ...
Loading ...
Loading ...