Loading ...
Loading ...
Loading ...
Problem solving guide
70
Problem Cause and remedy
The ironing board is not
heated.
Steam has not been used for a while.
Press the steam button . This will activate the
ironing board's heating system.
The steamer is attached to the steam connection on
the tower.
The ironing board does not heat up when the
steamer is connected.
The ironing board is not locked into place on both
sides of the tower.
Ensure the ironing board locks into place on both
sides of the tower (see “Assembly”)
The steam ironing system is damaged.
Contact Miele Service.
The temperature of the
iron is always high.
There is a fault.
Contact Miele Service.
The ironing board cover
is damp.
There is a fault.
Remove the ironing board cover and allow it to
dry.
Put the dry ironing board cover back on (see
“Cleaning or replacing the ironing board cover”).
If the ironing board gets damp again, contact Miele
Service.
Water is leaking from
the steam ironing sys-
tem at the height of the
water container when it
is being transported.
The frequent removal and replacement of the water
container may cause water droplets to collect in the
area under the water container.
Use a cloth to dry the area underneath the water
container.
The water filter is not inserted correctly.
Check the water filter.
The sealing rings are leaking.
Replace the sealing rings.
Loading ...
Loading ...
Loading ...