Loading ...
Loading ...
Loading ...
Problem solving guide
68
Problem Cause and remedy
The ironing board can-
not be set in the final
position during as-
sembly or dismantling.
The ironing board became dislodged from the latch-
ing mechanism when the board was not in its lowest
position.
Danger of burning on the resting surface while
it is hot.
The resting surface for the iron remains hot after
ironing.
Switch off at the wall socket and unplug it. Let the
iron and the resting surface cool down before re-
moving the iron from the resting surface, and pro-
ceed with the following steps.
Make sure the resting surface is cold before touch-
ing it.
Press and hold the yellow emergencyreleasebut-
ton on the tower ().
At the same time, turn one of the rotary controls
on the side of the tower as far as it will go in the
direction and hold it in this position ().
Push the tower down as far as possible ().
Release the rotary control first. Then release the
emergencyreleasebutton.
Now the ironing board can either be dismantled or
brought into its working position.
If the ironing board still will not lock into place,
contact Miele Service.
The iron does not heat
up.
The steam ironing system is switched off.
Loading ...
Loading ...
Loading ...