Operating instructions
Steam ironing system
To avoid the risk of accidents or damage to the appliance, it is es-
sential to read these instructions before it is installed and used for
the first time.
en-GB M.-Nr. 12 027 620
Caring for the environment
2
Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposing of your old appli-
ance
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain specific materials, com-
pounds and components, which were
essential for their correct function and
safety. These could be hazardous to hu-
man health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre for electrical and electronic ap-
pliances, or contact your dealer or
Miele for advice. You are also respons-
ible for deleting any personal data that
may be stored on the appliance being
disposed of. Please ensure that your
old appliance poses no risk to children
while being stored prior to disposal.
Contents
3
Caring for the environment .............................................................................. 2
Warning and Safety instructions ..................................................................... 6
Guide to the appliance...................................................................................... 14
Transporting....................................................................................................... 17
Assembly............................................................................................................ 18
Adjusting the height ............................................................................................ 19
Connection......................................................................................................... 21
Insert the mains plug into the socket. ................................................................. 21
Removing the iron and the steam hose holder ................................................... 22
Connecting the steam hose ................................................................................ 22
Before using for the first time .......................................................................... 24
Determining water hardness ............................................................................... 24
Using the test strips ....................................................................................... 24
Before using for the first time.............................................................................. 25
Switch on the steam ironing system .............................................................. 25
Language selection ........................................................................................ 25
Setting the water hardness ............................................................................ 26
The steam ironing system is now ready for use............................................. 27
Switching on ...................................................................................................... 28
Switching on the steam ironing system .............................................................. 28
Filling the water container ................................................................................... 29
Removing the water container ....................................................................... 29
Filling the water container .............................................................................. 29
Steam operation ............................................................................................. 30
Water quality .................................................................................................. 30
Selecting the ironing temperature ....................................................................... 31
CoolDown function.............................................................................................. 33
Auto-Off function................................................................................................. 33
Ironing ................................................................................................................ 34
Iron ...................................................................................................................... 34
Ironing with steam ............................................................................................... 35
Ironing without steam.......................................................................................... 36
Ironing with the non-stick soleplate .................................................................... 36
Attaching the non-stick soleplate................................................................... 36
Removing the non-stick soleplate.................................................................. 37
Contents
4
Active ironing board ............................................................................................ 37
Suction function ............................................................................................. 37
Inflation function............................................................................................. 37
Automatic switch on/off ................................................................................. 37
Memory function ............................................................................................ 38
Heated ironing surface ................................................................................... 38
Steamer .............................................................................................................. 39
Connecting the Steamer ..................................................................................... 39
Using the steamer ............................................................................................... 41
Brush attachment................................................................................................ 42
Connecting the brush attachment.................................................................. 42
Removing the brush attachment.................................................................... 42
Switching off the steam ironing system.......................................................... 43
Dismantling ........................................................................................................ 44
Setting the ironing board to its lowest working height........................................ 44
Folding the ironing board .................................................................................... 45
Disconnecting the steam hose............................................................................ 46
Storing the iron .................................................................................................... 46
Storing the steamer ............................................................................................. 46
Emptying the water container ............................................................................. 47
Storing the steam ironing system........................................................................ 47
Cleaning and care ............................................................................................. 48
Automatic rinsing ................................................................................................ 48
Preparing for the rinsing process ................................................................... 48
Emptying the residual water drawer............................................................... 48
Descaling............................................................................................................. 49
Descaling warning .......................................................................................... 50
Starting the descaling process early .............................................................. 51
Descaling process.......................................................................................... 51
Cleaning the housing........................................................................................... 58
Cleaning the soleplate of the iron........................................................................ 58
Cleaning or replacing the ironing board cover .................................................... 59
Cleaning the water filter....................................................................................... 60
Optional accessories ........................................................................................ 64
Accessories ......................................................................................................... 64
Non-stick soleplate ........................................................................................ 64
Ironing board cover ........................................................................................ 64
Steamer .......................................................................................................... 64
Contents
5
Care products...................................................................................................... 65
Descaling tablets for the steam ironing system ............................................. 65
Problem solving guide ...................................................................................... 66
Troubleshooting................................................................................................... 67
Display messages ............................................................................................... 73
Service................................................................................................................ 77
Warranty .............................................................................................................. 77
Electrical connection UK .................................................................................. 78
Technical data.................................................................................................... 80
Warning and Safety instructions
6
This steam ironing system complies with current safety require-
ments. Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the steam ironing
system, please read these instructions carefully before using it for
the first time. They contain important information on its safety, in-
stallation, use and maintenance.
Keep these instructions in a safe place and pass them on to any
future owner.
Correct application
The steam ironing system is intended for use in domestic house-
holds and similar residential environments.
The steam ironing system must only be used for ironing textiles
which are suitable for ironing according to the care label.
The steam ironing system is intended for domestic use only, as
described in these operating instructions.
Any other use is not permitted. Miele cannot be held liable for dam-
age resulting from incorrect or improper use or operation.
This steam ironing system can be used by children aged eight or
older and by people with reduced physical, sensory or mental cap-
abilities, or lack of experience and knowledge if they are supervised
at all times or if they have been shown how to use it in a safe way
and recognise and understand the consequences of incorrect opera-
tion. Children must not play with the steam ironing system. Users
must not allow children to carry out cleaning or maintenance work
without supervision.
The steam ironing system is not intended for outdoor use.
Warning and Safety instructions
7
Safety with children
Children under the age of eight must be kept away from the steam
ironing system unless they are supervised.
Children older than eight may only use the steam ironing system
unsupervised if they have been shown how to use it in a safe way,
and recognise and understand the consequences of incorrect opera-
tion.
Children must not be allowed to clean or maintain the steam iron-
ing system unsupervised.
Please supervise children in the vicinity of the steam ironing sys-
tem, and do not let them play with it.
Make sure that children under eight years of age cannot access
the iron, steam hose or the mains connection cable, either during
use or while the steam ironing system is cooling down.
Miele recommends that only children over the age of 14 are al-
lowed to operate the steam ironing system unsupervised.
Danger of suffocation.
Packaging, (e.g. plastic wrapping), must be kept out of the reach of
babies and children. Whilst playing, they could become entangled in
the packaging or pull it over their head and suffocate.
Warning and Safety instructions
8
Technical safety
Before setting up the steam ironing system, inspect it visually for
any external damage. Never use a damaged steam ironing system. A
damaged steam ironing system can be dangerous!
Check the iron of the steam ironing system for damage. Do not
use the iron if it has been dropped, if there is any visible damage or if
it is leaking.
Before connecting the steam ironing system to the power supply,
please ensure that the mains supply voltage (voltage and frequency)
complies with the values given on the data plate.
Connection to a supply voltage other than the one quoted on the
data plate can lead to functional faults and damage to the steam
ironing system. If in doubt, contact a suitably qualified electrician.
Always remove and unwind the power cable of the steam ironing
system completely from its (lower) storage compartment.
If the connection cable is damaged it must be replaced with a
special cable of the same type (available from Miele). For safety reas-
ons this must only be fitted by a Miele authorised service technician
or the Miele service department.
Do not use the steam ironing system if the ironing board cover is
damaged.
A damaged ironing board cover could be dangerous.
Do not use the steam ironing system without an ironing board
cover.
The ironing board cover must be replaced with an
original Mielespare part.
Warning and Safety instructions
9
The electrical safety of this steam ironing system can only be
guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt, please have the wiring
system of the building tested by a qualified electrician. Miele cannot
be held liable for the consequences of an inadequate earthing sys-
tem (e.g. electric shock).
Do not connect the steam ironing system to the mains electricity
supply via a multi-socket unit or an extension lead. These do not
guarantee the required safety of the appliance (e.g. danger of over-
heating).
This steam ironing system complies with all relevant safety re-
quirements. Unauthorised repairs could result in unforeseen dangers
for the user, for which the manufacturer cannot accept liability. Re-
pairs should only be undertaken by a Miele authorised service tech-
nician, otherwise any subsequent damage will not be covered by the
guarantee.
Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the safety standards of the appliance.
Warning and Safety instructions
10
The steam ironing system must be isolated from the electricity
supply during installation, maintenance and repair work. The steam
ironing system is only considered disconnected from the power sup-
ply if:
- the power plug of the steam ironing system is unplugged, or
- the mains circuit breaker is switched off, or
- the mains screw-out fuse is removed (in countries where this is
applicable).
Do not damage, remove or bypass the safety features and control
elements of the steam ironing system.
Only operate the steam ironing system when all removable outer
panels are in place so that it is impossible to touch an electrical
component or moving part.
Do not place open containers of liquid on the steam ironing sys-
tem.
If you see that any liquid has spilled or leaked from containers
onto the steam ironing system, disconnect the plug immediately. Do
not use the steam ironing system if liquid has got into the steam
ironing system. Contact the Miele Customer Service Department.
The steam ironing system must not be used in a non-stationary
location (e.g. on a ship).
Warning and Safety instructions
11
Correct application
Risk of burning due to hot components and steam.
The soleplate and the areas surrounding it on the iron and the
Steamer nozzles are very hot. Escaping steam can cause severe
burns.
Avoid direct contact with escaping steam, the soleplate and the
Steamer nozzles.
Never direct the soleplate and Steamer at other people, animals or
electrical appliances of any kind.
The steam ironing system is intended for domestic use only and is
not designed for commercial purposes.
Do not use a pressure washer or hose pipe to clean the steam
ironing system.
Clean the steam ironing system only after it has cooled down.
Danger of injury by crushing and trapping. Do not reach between
moving parts when assembling, dismantling or adjusting the height
of the steam ironing system.
The steam ironing system must only be set up on a level surface
which has the appropriate load-bearing capacity. The steam ironing
system must only be used in a horizontal position. The iron must be
used and placed on a flat stable surface.
The steam ironing system must be assembled when ironing. How-
ever, the steamer can be used when the ironing board is in the up-
right position.
Ensure that the power cable does not present a trip hazard when
unwound.
Use caution when the appliance is heated. There is an acute risk
of burning if you come in contact with the soleplate of the iron or the
steamer jets. The warning symbol “Hot surface”() on the iron in-
dicates that it is hot.
Warning and Safety instructions
12
Do not use solely demineralised water (e.g. distilled, battery wa-
ter) to fill the water container. This could cause the steam ironing
system to malfunction.
Always place the iron with its soleplate horizontally on the resting
surface of the steam ironing system. Ensure the steam function is
switched off and the soleplate does not protrude over the edges. Do
not place the iron anywhere else as this presents a fire hazard.
Danger of burning! If the iron remains on the resting surface for a
longer period of time, the surface will become hot. Avoid direct con-
tact with the resting surface.
Danger of burning! Never direct the steam or the steam jets of the
iron or steamer at people, animals or electrical appliances of any
kind.
Danger of burning! Never point the steam at clothing while the
clothes are being worn! The clothing will intensify burning of the skin.
Switch off the steam ironing system before disconnecting the
power cable.
Switch off at the wall socket and withdraw the plug from the
socket. Always pull by the plug to withdraw the plug from the socket.
Do not leave the steam ironing system unattended when it is
ready for use. Before you leave the steam ironing system, disconnect
the steam ironing system from the mains and withdraw the plug from
the mains socket.
Do not touch the power cable or the steam hose with the sole-
plate of the heated iron as this could result in damage.
While descaling the system, the iron or the Steamer must not be
connected to the steam ironing system.
The iron must not be stowed in its storage compartment when it is
connected. This could result in damage to the steam ironing system.
Warning and Safety instructions
13
Do not use the residual water drawer to store accessories or sim-
ilar items. The residual water drawer should be used only to collect
residual water.
Do not insert any objects into the apertures on the steam ironing
system. If an aperture is blocked, do not use the system.
Do not hang items of laundry on the folded steam ironing system.
This may cause the steam ironing system to tip over due to the effect
of leverage.
Avoid ironing across hard or sharp-edged items. These can leave
marks on the soleplate.
Do not store the steam ironing system near petrol, paraffin or
other highly flammable substances. Risk of fire and explosion!
Only use the steam ironing system inside buildings where the am-
bient temperature is between 10°C and 40°C.
Freezing temperatures, excessive heat and humidity will adversely
affect the functionality of the steam ironing system.
Do not store the steam ironing system in a room where there is a
risk of frost occurring. Frozen water in the water container, steam
generator or steam hose will cause damage to the appliance.
Using accessories
Accessory parts may only be fitted when expressly approved by
Miele. If other parts are used, guarantee, warranty and/or product li-
ability claims will be invalidated.
Guide to the appliance
14
a
Ironing board
b
Iron with steam hose
c
Steam hose holder
d
Handle
e
Water container
f
Tower
g
Residual water drawer
h
Top storage compartment
For the iron and the steam hose
holder
i
Ironing board X-frame
j
Iron resting surface
k
Mains connection cable
l
Bottom storage compartment
For the mains connection cable, the
Steamer* and the non-stick soleplate
m
Rollers
n
Release handle
For assembling the steam ironing
system
* Supplied as standard with steam ironing system B4847. Available as optional ac-
cessory with steam ironing systems B4312 and B4826.
Guide to the appliance
15
Tower
a
Rotary dial for height adjustment
and folding the appliance away
b
Iron resting area
c
Steam connection
Tower (top view) with open storage com-
partment (top)
d
Steam hose holders
e
Control field
f
Iron with steam hose
Guide to the appliance
16
Control panel on tower
h
On/Off button
Switches the steam ironing system
on or off.
i
Display
Displays messages and instructions
for the user.
j
Arrow button
Lights up if additional options are
offered or if the display text exceeds
the specified length of a line. Scrolls
down the list to the next option or
decreases a value.
k
Arrow button
Lights up if additional options are
offered or if the display text exceeds
the specified length of a line. Scrolls
up the list to the next option or in-
creases a value.
l
OKbutton
Confirms the selection or the inform-
ation in the display.
m
button
Opens the settings menu. The set-
tings menu can be used at any time
to change the language and the wa-
ter hardness level, or to start the de-
scaling process.
Some of the messages in the display
are more than one line long. Touch the
or button to read them in full.
14
n
Emergency releasebutton
This releases the steam ironing sys-
tem. The button is only required if
the ironing board cannot be set in
the final position during assembly or
dismantling (see “Problem solving
guide”).
Transporting
17
Danger of injury and damage to
the appliance due to released ironing
board.
The ironing board lock may become
dislodged if the steam ironing system
is transported or lifted while it is as-
sembled.
Only ever transport the steam ironing
system while it is folded up.
The steam ironing system is fitted with
2rollers. This allows the steam ironing
system to be pulled across an even
surface when folded up.
Hold the steam ironing system by its
handle and tip it gently towards you
until the wheels are free to roll.
This allows you to navigate easily
across obstacles such as carpet edges,
door sills or single steps.
2people are required for carrying the
steam ironing system up or down
stairs. When doing so, ensure the
ironing board is at the bottom.
When transporting the appliance, use
both recessed grips on the underside
of the appliance.
Assembly
*INSTALLATION*
18
Take the steam ironing system to its
installation site.
Use one hand to pull the release
mechanism upwards.
This releases the locking mechanism of
the ironing board and the X-frame folds
down.
Hold onto the release mechanism
and guide the ironing board into a po-
sition of approx. 45°.
The ironing board remains in this posi-
tion by itself.
Use both hands to pull the ironing
board upwards into a horizontal posi-
tion until it audibly clicks into place
on both sides of the tower.
click!
click!
Ensure the ironing board has locked
into place on both sides of the tower.
The height adjustment and the fan in
the ironing board only work if both sides
of the appliance have locked into place.
Assembly
*INSTALLATION*
19
The steam ironing system is now as-
sembled. This is its lowest working pos-
ition of approx. 83cm high.
Adjusting the height
The steam ironing system can be adjus-
ted to suit your personal preference.
The maximum working height is around
102cm.
When adjusting the height, ensure
the mains connection cable does not
become trapped in the mechanism.
Turn one of the rotary controls on the
side of the tower handle as far as it
will go in thedirection. Hold the
rotary control in this position.
Assembly
*INSTALLATION*
20
At the same time, pull the handle up-
wards with the other hand or press
the handle down.
Do not push down on the ironing
board while adjusting the height.
Always use the handle on the tower
to adjust the height.
When you have reached your desired
working height, release the rotary
control.
The rotary control will spring back into
the centre position. The ironing board
remains in this position by itself.
For additional stability, the ironing
board locks into place under extra
pressure with an audible click. Now
the working height you selected is
twice as secure.
Tip: Adjust your working position to ap-
proximately hip height for optimum
comfort.
Connection
*INSTALLATION*
21
Insert the mains plug into the
socket.
The steam ironing system is designed
for connection to a properly installed
earthed socket for
AC220-240V,50-60Hz.
Open the (lower) storage compart-
ment by swinging the lid downwards.
Remove the power cable from the
(bottom) compartment.
Insert the plug into a suitable earthed
socket (see chapter “Electrical con-
nection”).
Guide the power cable through the
groove in the cover.
Close the (bottom) storage compart-
ment.
When closing the compartment, en-
sure the power cable does not be-
come trapped between the cover
and the housing or between the
wheels and the tower.
Connection
*INSTALLATION*
22
Removing the iron and the
steam hose holder
Open the lid of the top storage com-
partment on the tower.
Take out the iron.
Close the storage compartment lid.
Plug the steam hose holder supplied
into one of the sockets provided.
Tip: Use the socket on the side on
which you are ironing.
The steam ironing system is suitable
for right- or left-handed people. The
operation is optimised for both sides.
Connecting the steam hose
Lift the lid of the steam connection.
Pull back the slider on the steam
hose plug.
Insert the plug into the steam con-
nection.
Release slider on the plug when it is
locked into the steam connection.
The iron is now connected to the steam
connection.
Connection
*INSTALLATION*
23
Guide the steam hose on the rubber
ring into the steam hose holder.
Ensure the steam hose fits tightly
and is not twisted.
To avoid damaging or discolouring
the ironing board cover, always place
the iron on the resting surface before
you start ironing and when you take a
break from ironing.
Danger of the iron tipping over if
it is placed upright on its edge.
An iron placed upright can easily tip
over or fall to the floor.
Always place the iron onto the rest-
ing surface with its soleplate down.
Danger of burning on the resting
surface while it is hot.
If the iron remains on the resting sur-
face for any length of time, the sur-
face will become hot.
Avoid direct contact with the resting
surface.
Only touch the handle on the lid.
Before turning on the steam ironing
system, and before placing the iron
down, make sure you switch off the
continuous steam function.
If the continuous steam function is
not switched off, the following mes-
sage will appear in the display
Release stm. button.
Unlock the button by pushing the
slider on the iron forward (see “Iron-
ing”).
Condensation can form on the resting
surface. However, this does not affect
the functioning of the steam ironing
system.
Before using for the first time
24
Before using the steam ironing sys-
tem for the first time, remove all
packaging (e.g. the protective film
from the tower).
Determining water hardness
In order for the steam ironing system to
function properly and to display a mes-
sage prompting you to descale it at the
correct time, it is important to adjust the
steam ironing system to the hardness of
your local water supply.
The water hardness level indicates
how much calcium is dissolved in the
water. The higher the calcium content,
the harder the water, and the harder
the water, the more often the steam
ironing system will need to be de-
scaled.
Your local water supplier can inform you
of the water hardness level in your area.
This information can also be found on-
line on the website of the relevant utility
company.
As an alternative, you can also determ-
ine the approximate water hardness by
using the test strips supplied.
Using the test strips
Dip the test strip in the water for ap-
prox. 1second.
Remove the test strip from the water
and shake the water off the test strip.
After approx. 1 minute, and based on
the colouration, you will be able to read
the water hardness from the table be-
low:
Hardness range on the test strip
Test strips Water hardness
4 green zones <3°dH / 0.5 mmol/l
1 red zone < 4 °dH / 0.7 mmol/l
2 red zones < 7 °dH / 1.3 mmol/l
3 red zones < 14 °dH / 2.5 mmol/l
4 red zones < 21 °dH / 3.8 mmol/l
Tip: It is useful to know your water
hardness so that you can provide the
service technician with this information
in the event of any service calls. Please
note your water hardness level here:
......................................(°dH or mmol/l)
Before using for the first time
25
Before using for the first time
The following steps must be carried
out before using the appliance for the
first time:
Switch on the steam ironing system
Press the button on the control
panel on the tower.
Willkommen
The Welcome screen appears for a few
seconds in the display. The display will
then guide you through the following
settings:
Language selection
deutsch
Use the or arrow buttons to se-
lect your preferred language.
english (GB)
Press the OKbutton to confirm your
selection.
The language settings can be
changed at any time via the settings
menu ( button, menu option
Language ).
Before using for the first time
26
Setting the water hardness
Set water
hardness...
Before the water hardness can be set,
the display message Set water hard-
ness... must be acknowledged by press-
ing the OK button.
The steam ironing system gives you
the option to set the water hardness to
one of 10 settings.
Use the following table to determine the
water hardness level that must be set
for your steam ironing system:
°dH mmol/l °f Setting
1-4 0.2 - 0.7 2-7
Level 1
5-7 0.9 - 1.3 9-13
Level 2
8-11 1.4 - 2.0 14-20
Level 3
12-15 2.2 - 2.7 22-27
Level 4
16-20 2.9 - 3.6 29-36
Level 5
21-25 3.8 - 4.5 38-45
Level 6
26-30 4.7 - 5.4 47-54
Level 7
31-36 5.6 - 6.5 56-65
Level 8
37-45 6.7 - 8.1 67-81
Level 9
46-70 8.3 - 12.6 83-126
Level 10
Level 7
Use the or arrow buttons on the
control panel to set the water hard-
ness level for your household.
Tip: If the water hardness fluctuates
(e.g. 37-50°dH/6.7-9.0mmol/l), always
set the highest value (in this example
50°dH/9.0 mmol/l = Level 10).
Make sure the correct water hard-
ness level is set.
An incorrect setting will invalidate all
warranty claims.
Level 10
Confirm your selection by pressing
theOK button.
The steam ironing system is now set for
the specified water hardness.
The water hardness level can be
changed at any time via the settings
menu (button,
optionWater hardness).
Before using for the first time
27
The steam ironing system is now
ready for use
This completes the settings for using
the appliance for the first time. The
message Initial set-up complete will ap-
pear in the display. Confirm this mes-
sage by pressing the OK button.
The steam ironing system will normally
run a rinse programme automatically
after it has been set up for use.
The steam ironing system can then be
switched off or you can continue using
it.
When using the appliance for the first
time, a slight odour may be noticeable
during the heating-up phase. This will
dissipate with further use.
During operation of the steam ironing
system, pumping, boiling and knock-
ing noises may be heard. These are
normal noises and do not indicate a
malfunction.
Switching on
28
Switching on the steam ironing
system
Press the button on the control
field of the tower to switch on the
steam ironing system.
The button lights up and the wel-
come screen appears for several
seconds in the display.
If the iron was not connected to the
steam connection before switching it
on, the message Attach hose appears
on the display. In this case, the steam
hose must be attached to the steam
connection (see “Connection”).
If the steam button on the iron is
locked when the steam ironing system
is switched on, Release stm. button
will appear in the display. If this is the
case, first unlock the steam button by
pushing the slider on the iron forwards
(see “Ironing”).
The message Heating-up phase then
appears on the display. The steam iron-
ing system starts to heat up. During the
heat-up phase, some steam may be
discharged from the iron.
As soon as the steam ironing system is
ready and steam is available, the mes-
sage Ready for use will be displayed.
Depending on the operating time,
immediately after switching the
steam ironing system on, the auto-
matic rinse function can be started
(see “Automatic rinsing”) or you may
start the descaling process (see “De-
scaling”).
The steam ironing system is not
available for ironing while the rinse
and descaling processes are run-
ning.
Switching on
29
Filling the water container
If the water container is empty or not
installed in the tower, the message
Fill water cont. will appear in the dis-
play.
Removing the water container
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
When removing the water container,
you may notice some water dripping
while the water container valves are
closing.
Tip: The dripping can be prevented by
removing the water container slowly.
Filling the water container
Open the screw cap at the rear of the
water container by turning the cap
anti-clockwise.
Remove the screw cap.
Use fresh tap water to fill the con-
tainer (water temperature approx.
15-35°C).
Tip: By placing the water container in
the horizontal position, the water con-
tainer can also be filled under very low
taps.
Replace the screw cap on the water
container.
Close the screw cap by turning it
clockwise as far as it will go.
Put the water container back into the
tower.
The water container can be removed
and refilled at any time (even during
the ironing process). The amount of
water required will depend on how
much steam is required.
Switching on
30
Steam operation
Ready for use
After inserting the water container, wait
until the steam ironing system is ready
to use steam. This is indicated by the
Ready for use message in the display.
If the water container is refilled during
the ironing process, the steam gener-
ator may have to reheat.
Tip: If you fill the water container as
soon as the Fill water cont. message
is displayed and the container is inser-
ted into the tower there is no delay.
The steam ironing system is not active
whilst the message Fill water cont. is
shown in the display. However, you may
continue to use the iron.
Tip: You can save energy by ironing dry
and without steam. To do this, remove
the water container. In this case, the
steam generator will not be heated and
the inflation and suction function of the
ironing board is not available (see “Act-
ive ironing board”).
Water quality
Use only fresh tap water.
Water prepared using commercially
available water filters may also be
used.
For water hardness of more than
14°dH / 2.5 mmol/l you can use tap wa-
ter mixed at a 1:1 ratio with distilled wa-
ter. This halves the water hardness. Set
the halved water hardness to the cor-
responding level on the steam ironing
system (see “Setting the water hard-
ness”).
If your tap water has a water hardness
of 60°dH / 10.8 mmol/l the mixing ratio
of 1:1 with distilled water results in a
water hardness of 30°dH / 5.4 mmol/l.
The water hardness level that must be
set on your steam ironing system must
now be Level 7.
Never use solely demineralised (dis-
tilled) water to fill the water container.
This can cause the steam ironing
system to malfunction.
Do not use water from a water
softener system.
Do not use condensate (e.g. from
other appliances such as air condi-
tioning units, dryers).
Never use rainwater.
Do not use additives, (e.g. perfumes,
ironing water, starch, carbon diox-
ide).
Switching on
31
Selecting the ironing temperat-
ure
➨
Use the temperature selector on the
iron to set the ironing temperature.
The temperature settings are indicated
by dots around the selector. These dots
correspond to the international care
symbols used for ironing.
At temperature levels and you
can use steam when ironing.
With temperature level the sole-
plate temperature is too low for iron-
ing with steam. If you use this tem-
perature level, do not use the
steam button.
If you do, water will escape from the
steam jets.
Tip: Sort your laundry according to the
heat sensitivity of the fabric. This allows
you to iron faster: First, iron your laun-
dry that is made of heat-sensitive fabric
(e.g., synthetics) at temperature level .
Then, iron all laundry made of wool or
silk, using the temperature level . Fi-
nally, iron all laundry made of cotton
and linen, using temperature level .
Set the temperature selector to the
required temperature setting.
The indicator light on the temperature
selector will light up yellow whilst the
iron is heating up. It will go out once the
set temperature has been reached.
The iron is then ready for use.
Switching on
32
Care label
(on the garment)
Ironing with steam for best
results
(Material / Temperature setting)
Ironing without steam
(Material / Temperature setting)
Low temperature
With non-stick soleplate
(see “Ironing with the non-stick
soleplate”)
Minimum iron, synthetics, appli-
qués, prints, flocking, etc.
Minimum iron, synthetics
Medium temperature
Woollens, Silks
High temperature
Cottons, linens
Do not iron
Switching on
33
CoolDown function
Iron switched off
The heating of the iron switches off
automatically if the iron is not moved for
longer than 3minutes. The message
Iron switched off appears in the display
to indicate that the heating has
switched off. After a certain time, steam
is no longer available. The message
Release stm. button appears in the
display when the steam button is
locked. In this case, unlock the
steam button by pushing the slider
on the iron forwards (see “Ironing”).
Risk of burning or scalding due
to the hot soleplate.
The soleplate is still hot immediately
after the heating has been switched
off.
Avoid direct contact.
As soon as the iron is moved, or the
steam button has been released, the
iron will start heating up again automat-
ically. The duration for the steam to be
available again depends on the length
of time the heating was switched off.
When the steam ironing system is ready
and steam is available, the message
Ready for use will be shown in the
display on the tower.
Do not leave the steam ironing
system unattended with the iron or
Steamer connected.
Always switch off at the wall socket
and withdraw the plug before leaving
the steam ironing system unatten-
ded.
Auto-Off function
If the iron or the steamer is not used for
approx. 25minutes, the entire steam
ironing system switches off automatic-
ally.
The steam ironing system is switched
on again by pressing the button on
the control panel.
Ironing
34
Iron
Depending on the model, your steam
ironing system has one of the following
irons:
Steam ironing system B4312:
a
Steam button
b
Slider for constant steam provision
c
Suction function button
d
Inflation function button
Steam ironing system
B4826/B4847:
a
Steam button
b
Slider for constant steam provision
c
Power level button
d
Inflation/suction button
Irons supplied with previous Miele
steam ironing systems (B1xxx/B2xxx)
cannot be used with this appliance.
Ironing
35
Ironing with steam
The steam ironing system is ready for
use when Ready for use appears in
the display. The burst of steam is con-
trolled by the button on the iron.
When the button is pressed, the fan
on the underside of the ironing board
starts automatically.
When the button is released, the fan
will also stop after a brief run-on time.
When using the steam function for a
long time, make sure the room is well
ventilated, as high air humidity can de-
velop.
Using short bursts of steam
Briefly press the button and re-
lease it again.
Using continuous steam
Press the button and at the same
time pull the slider back.
Release the button again.
While the slider is pulled back, the
button remains in a locked position.
The steam hose may become warm.
Steam is now emitted continuously.
Stopping the continuous steam func-
tion
Push the slider forwards.
This will unlock the button again and
the steam burst function is ended.
The continuous emission of steam
must have stopped before the iron is
put back on the resting surface!
If the steam button was not unlocked
before placing the iron down, steam
will stop being produced after ap-
prox. 3minutes and Release stm.
button will appear in the display.
When turning off the iron, unlock the
button by pushing the slider
forwards.
Filling the water container
Fill the water container when the
message Fill water cont. appears in
the display (see “Filling the water
container”).
When using the steam function for a
long time during ironing, condensa-
tion can build up in the ironing board.
Sensitive floors can be damaged by
droplets of water.
If you notice condensate underneath
the ironing board, use a cloth to wipe
it off.
Tip: If you take a break from ironing,
condensate may collect in the steam
hose. Press the button to expel the
condensate from the hose. To prevent
the garments from becoming damp, do
not direct the first burst of steam onto
the garment after a break in ironing.
Ironing
36
Ironing without steam
Remove the water container from the
steam ironing system if you want to
iron without steam.
The steam generator will not heat up
and saves you energy.
Ironing with the non-stick sole-
plate
A non-stick soleplate has been in-
cluded with the accessories which can
simply be clipped onto the iron.
The non-stick soleplate allows appli-
qués, printed or flocked textiles, etc. to
be ironed without turning the garment
inside out. In addition, this reduces or
eliminates the formation of shiny
patches on dark textiles.
Always try the non-stick soleplate first
on an inconspicuous part of the fabric.
The soleplate gets very hot dur-
ing use!
Avoid direct contact.
Attaching the non-stick soleplate
Place the tip of the iron inside the
non-stick soleplate.
Pull back the tab, which is located at
the back of the non-stick soleplate.
Hold the tab in this position.
Push the iron completely onto the
non-stick soleplate.
Release the tab again.
The non-stick soleplate is now secured
onto the iron.
Before you start ironing, let the non-
stick soleplate heat up for approx.
1minute until it has reached the iron-
ing temperature.
The iron is now ready for use.
Ironing
37
Removing the non-stick soleplate
Hold the iron by the handle.
Risk of burning or scalding due
to hot iron and non-stick soleplate.
The non-stick soleplate is still very
hot after ironing.
Avoid direct contact.
Only touch the tab of the non-stick
soleplate.
Pull back the tab at the back of the
non-stick soleplate.
Remove the iron from the non-stick
soleplate.
Only store the non-stick soleplate in
the bottom storage compartment
after the soleplate has cooled down.
Active ironing board
The steam ironing system uses a fan
that sucks away the steam or uses the
inflation function to inflate the ironing
board for optimum positioning while
ironing garments.
The , or , buttons on the
iron control the fan in the ironing board.
Suction function
The suction function ensures optimum
steam penetration of the fabric. At the
same time, the suction avoids the form-
ation of condensation on the ironing
board. The suction function also holds
the garment in place and ensures it
does not shift on the ironing board.
Inflation function
The inflation function forms a cushion of
air between the fabric and the ironing
board. This helps prevent seams being
pressed into the garment. The inflation
function allows you to iron without flat-
tening the fabric.
Tip: The inflation function also assists
with ironing ruffles and sequins.
Automatic switch on/off
The automatic switch on/off feature en-
sures that the fan starts at exactly the
right moment. If the steam function is
being used, the fan starts automatically.
If steam is no longer needed, the fan
will stop after a short run-on time.
Ironing
38
Memory function
The memory function saves the fan dir-
ection and the power setting used last
with your steam ironing system. When
you use the appliance the next time,
you do not need to set it again.
Heated ironing surface
When the iron is connected and the
steam ironing system is switched on,
the surface of the ironing board will
heat up automatically. This function re-
duces the formation of condensation on
the ironing board.
If the steamer is connected to the
steam ironing system, the surface of
the ironing board will not be heated.
Fan control for the B4312:
The button activates the inflation
function.
The button activates the suction
function.
Fan control for the B4826/B4847:
Activating the inflation and suction
function
Press the button to switch between
the inflation function and the suction
function. Use the button to activate the
function.
Setting the power level
When using the button, you can
switch between both fan power levels.
Each press of the button switches
between the following power levels:
- Level1 = 1fan active
- Level2 = 2fans active
Steamer
39
The B4847 steam ironing system is
equipped with a steamer in addition to
the iron. The steamer is available as
an optional accessory for the B4312
and B4826 steam ironing systems.
The steamer makes ironing hanging
garments easier, e.g. dresses and jack-
ets. It comes with a removable brush
attachment for lifting the fibres.
The steamer weighs less than the iron
and also does not have a hot soleplate,
therefore eliminating the risk of shiny
patches if it accidentally comes into
contact with the fabric.
The steamer can also be used when the
appliance is folded up.
The Steamer supplied with previous
steam ironing systems B1xxx or
B2xxx cannot be used with this appli-
ance.
Connecting the Steamer
You can also plug the Steamer into the
steam connection of the steam ironing
system as an alternative to the iron.
Disconnecting the iron from the
steam connection
Risk of burning or scalding due
to the hot soleplate.
The iron soleplate is still very hot
after use.
Avoid direct contact.
Place the iron on its resting surface
and let it cool down completely be-
fore you store it away.
Do not pull on the steam hose.
Always pull on the plug at the end of
the steam hose when disconnecting
it from the steam hose connection.
Pull back the slider located on the
side of the steam hose plug.
Hold the slider back.
Withdraw the plug from the steam
connection.
Now you can connect the Steamer to
the steam connection.
Steamer
40
Attaching the Steamer to the steam
connection
Pull back the slider located on the
side of the steam hose plug.
Insert the steam hose plug into the
steam connection on the tower.
Release the slider when it has locked
into place in the steam connection.
The Steamer is now attached to the
steam connection.
You can at any time plug the iron into
the steam connection as an alternat-
ive to the Steamer.
You do not need to switch off the
steam ironing system to do this.
After switching between the iron and
the Steamer, there is a short interval be-
fore the steam is ready. This ensures
that sufficient steam is available.
The Steamer is ready when the mes-
sage Ready for use is shown in the
display.
Steamer
41
Using the steamer
Danger of burning due to hot
steam!
Never direct the steam or the steam
jets at people, animals or electrical
appliances of any kind.
Never point the steam at clothing
while the clothes are being worn! The
clothing will intensify burning of the
skin.
The emission of steam is controlled by
thebutton on the steamer.
Tip: Always steam the fabric in the dir-
ection of the fibres.
Using short bursts of steam
Briefly press button .
Then release the button.
Using continuous steam
Press button .
Keep the button pressed in.
Stopping the continuous steam func-
tion
Release button.
If you take a break from ironing, con-
densate may collect in the steam hose.
Press button to expel the condens-
ate from the hose.
The optimum distance between the
steamer and the fabric depends on
the sensitivity of the fabric and can
vary from one fabric to another.
Always try it first on an inconspicu-
ous part of the fabric.
Steamer
42
Brush attachment
The steamer is equipped with a brush
attachment which can be clipped on.
The brush attachment helps to raise the
fibres.
You can hold the steamer directly
onto the fabric while the brush at-
tachment is in place.
Always try it first on an inconspicu-
ous part of the fabric.
Connecting the brush attachment
Hold the brush attachment in front of
the steamer so that the lugs on one
side fit into the notches on the
steamer.
Press the side of the brush attach-
ment against the steamer until the
lugs snap into place.
Guide the brush attachment into the
notches on the opposite side.
Press the brush attachment against
the steamer until the lugs snap into
the notches.
The brush attachment is now connec-
ted to the steamer and can be used.
Removing the brush attachment
To remove the brush attachment, pull
it off the steamer by the raised sec-
tion.
Switching off the steam ironing system
43
To switch off the steam ironing sys-
tem, press thebutton.
The light in thebutton goes out.
The steam ironing system is now
switched off. The last selected fan set-
tings are saved and are available for the
next time you switch on the appliance.
Place the iron on the resting surface
until it has cooled down.
The steam ironing system can be dis-
mantled while the iron is cooling down
(see “Dismantling”).
Remove the plug from the socket.
Bottom storage compartment
Remove the mains connection cable
from the bottom storage compart-
ment.
Dismantling
44
Setting the ironing board to its
lowest working height
To dismantle the steam ironing sys-
tem, the ironing board must first be
set to its lowest working height. Make
sure you do not trap the mains con-
nection cable in the mechanism. En-
sure the residual water drawer is com-
pletely emptied, pushed in and locked
in place.
Turn one of the rotary controls on the
side of the handle as far as it will go
in the direction.
Hold the rotary control in the posi-
tion.
The height of the ironing board can now
be adjusted.
Keep holding the rotary control in the
direction and, simultaneously, use
the handle to push the ironing board
down as far as possible.
Do not push down directly on the
ironing board.
Use only the handle to push the iron-
ing board down.
Release the rotary control.
The rotary control will spring back into
the centre position.
The ironing board is now at its lowest
working height and can be folded up.
Dismantling
45
Folding the ironing board
Turn one of the two rotary controls as
far as it will go towards the posi-
tion.
The ironing board is now unlocked.
Release the rotary control.
The rotary control will spring back into
the centre position.
Guide the ironing board downwards
or allow it to slide down by itself.
The ironing board will remain in this po-
sition by itself.
Push the ironing board up by the
tapered end until it is upright and
locks into position on the tower.
Push the protruding end of the X-
frame onto the ironing board until the
frame locks into place.
Dismantling
46
Disconnecting the steam hose.
Do not pull on the steam hose!
Hold the plug at the end of the steam
hose. The plug may still be warm im-
mediately after using the system.
Pull back the slider located on the
side of the steam hose plug.
Hold the slider back.
Withdraw the plug from the steam
connection.
After withdrawing the plug, drops of
water may escape from the steam hose.
Storing the iron
Risk of burning or scalding due
to the hot soleplate.
The iron soleplate is still very hot
after ironing.
Avoid direct contact.
Allow the iron to cool down after use.
Do not stow the iron away while it is
still attached to the hose.
Place the iron on the resting surface
on the tower and let the iron cool
down.
Store the cool iron in the top storage
compartment.
Storing the steamer
Never put the steamer away while it
is still connected to the steam sys-
tem.
Store the steamer in the (bottom)
storage compartment.
Dismantling
47
Emptying the water container
Empty the water container if the
steam ironing system is not going to
be used for a long period of time.
Remove the water container (see
“Filling the water container”).
Make sure the water container is
completely emptied.
Storing the steam ironing sys-
tem
Take the steam ironing system to its
storage place.
Do not store the steam ironing sys-
tem in a room where temperatures
below freezing may occur.
Frozen water can cause damage to
the water container, steam generator
and steam hose.
Cleaning and care
48
Automatic rinsing
The automatic rinse function clears
the steam generator of mineral depos-
its from the evaporated water.
After approx. 3litres of water have been
passed through the system, the rinse
process will start automatically the next
time the steam ironing system is
switched on.
The rinsing process takes several
minutes. During the process, some
steam escapes from the residual water
drawer and splashing noises can also
be heard. The message Appliance
rinsing will appear in the display on the
tower.
The iron cannot be used while the
rinsing process is in progress.
The steam ironing system can only
be used again once the automatic
rinsing process is completed.
Preparing for the rinsing process
Set the steam ironing system to its
highest working position to enable
the residual water drawer to be re-
moved later on (see “Height adjust-
ment”).
If the message Fill water cont. ap-
pears in the display, fill the water
container (see “Filling the water con-
tainer”).
Emptying the residual water drawer
After the rinsing process has com-
pleted, the residual water drawer must
be emptied. The message Empty
drawer will appear in the display on the
control panel when the residual water
drawer needs to be emptied. The re-
sidual water drawer can be removed
from the tower when the steam ironing
system is set at its highest working
level.
Only remove the residual water
drawer from the tower when promp-
ted to do so by the message
Empty drawer in the display.
The residual water drawer may still
be warm after the rinsing process.
Empty the residual water drawer.
As long as the residual water drawer is
not inserted into the tower, the display
will show the following message Fit
drawer.
Clean and dry the residual water
drawer.
Cleaning and care
49
The residual water drawer is dish-
washer-safe or can be washed by
hand using warm water and a little
washing-up liquid.
Make sure the metal discs (contacts)
at the top of the residual water
drawer are clean and dry. These
metal discs send a signal to the
steam ironing system when the re-
sidual water drawer is full or if it is in-
serted into the tower.
The discs will not function correctly if
they are dirty or damp.
Slide the residual water drawer back
into the tower until it clicks into place.
Steam cannot be produced until the
empty residual water drawer is re-
placed in the tower. Steam is only
available again when the message
Ready for use appears in the dis-
play .
Descaling
The steam ironing system must be de-
scaled regularly to ensure that it func-
tions correctly. The steam ironing sys-
tem has an automatic descaling func-
tion to assist you.
The interval for descaling depends on
the water hardness level set. The de-
scaling intervals are shorter for hard
water than for soft water.
We recommend using the
MieleFashionMaster descaling tab-
lets. These have been specially de-
veloped for use with this Miele
product to optimise the descaling
process.
Other descaling agents, which con-
tain other acids besides citric acid
and/or other undesirable substances,
such as chlorides for example, could
cause damage to the product.
Moreover, the descaling result re-
quired could not be guaranteed.
You will need 1descaling tablet to de-
scale the appliance.
Miele descaling tablets are available to
order from your Mieledealer, the Miele
Customer Service Department or the
Mielewebsite (see “Optional accessor-
ies”).
The iron or Steamer must not be
connected during descaling of the
steam ironing system.
Cleaning and care
50
Descaling warning
Descale soon will appear in the dis-
play the next time you switch the steam
ironing system on if there are only about
2hours of ironing available before the
system needs descaling.
You can start the descaling process
whilst the system is cold via the Set-
tings menu (see “Starting the descaling
process early”) or you can press the OK
button to confirm the message in the
display and continue ironing as normal.
The symbol will continue to show in
the display until descaling is carried out.
After the remaining operating hours
have elapsed, the descaling process
must be carried out before the steam
ironing system can be used again.
You can also start the descaling pro-
cess at a time that suits you (see
“Starting the descaling process
early”).
You can interrupt the descaling process
by switching the steam ironing system
off with the button. When you switch
the system back on, descaling will start
again from the point where the process
was interrupted.
The messages in the display will guide
you through the descaling process. The
entire descaling process takes approx.
90minutes.
Only proceed with stages of the pro-
cess when prompted to do so by the
appropriate message in the display.
Once the descaling process has star-
ted, your presence is required after
around 20 minutes and again after a
further 60 minutes. For the rest of the
descaling process, you can leave the
steam ironing system unattended.
Tip: To optimise the descaling process,
start the procedure while the system is
still cold after switching the steam iron-
ing system on. This way, you will avoid
a delay of up to 3hours that may be
caused by the cooling phase.
Cleaning and care
51
Starting the descaling process early
Ready for use
When the steam ironing system is
switched on, press the button on
the control panel.
The settings menu will be displayed.
Use the arrow buttons to select indi-
vidual settings.
Language
Use the or arrow buttons to se-
lect the Descale option.
Descale
Confirm your choice by pressing the
OK button.
Select the Start descaling option.
Confirm your choice by pressing the
OK button.
The descaling process will now start.
Descaling process
The following display messages will
guide you through the entire descaling
process. Only proceed with the re-
quired action if you are prompted to
do so by the appropriate message in
the display.
Detach hose
Remove the steam hose of the iron or
the steamer from the steam connec-
tion on the tower.
The iron or the steamer must not be
attached to the steam connection
during the entire descaling process.
Cleaning and care
52
Fill water container to mark
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
When removing the water container,
you may notice some water dripping
while the water container valves are
closing.
Tip: The dripping can be prevented by
removing the water container slowly.
After removing the water container, the
message Add descaler will appear in
the display.
Add descaler
Turn the screw cap at the back of the
water container anti-clockwise and
remove the cap.
Level mark on the water container
Use fresh tap water to fill the water
container (water temperature approx.
15 to 35°C) to the level marking line.
It is important not to use more or less
water to fill the water container.
Add 1 descaling tablet to the water
container.
Replace the screw cap on the water
container.
Turn the screw cap clockwise as far
as it will go.
The screw cap is now closed.
Cleaning and care
53
Add descaler
Press the OKbutton to display the
next step.
The message Fit water container will
now appear in the display.
Fit water container
Put the water container back into the
tower.
After about 10 minutes (the time it takes
for the descaling tablet to dissolve), the
descaling process begins automatically.
Messages in the display will tell you
when to empty the residual water
drawer or when to fill the water con-
tainer.
If the water container becomes
empty during descaling or if it is re-
moved from the tower unprompted,
the messageFit or refill water con-
tainer will appear.
During the descaling process, water is
pumped into the steam generator at
various times and is drained back
again into the residual water drawer.
Some steam will escape and splash-
ing noises can be heard during this
process.
Cleaning and care
54
Empty drawer
This message may be displayed after
inserting the water container with the
descaling tablet. If you do not see this
message, you can skip the following
steps and continue as soon as you
seePre-rinse in the display.
Set the steam ironing system to its
highest working position in order to
remove the residual water drawer
(see “Height adjustment”).
Remove the residual water drawer
from the tower.
The residual water drawer may still
be warm after the rinsing process.
Empty the residual water drawer.
As long as the residual water drawer is
not inserted into the tower, the display
will show the following message Fit
drawer.
Fit drawer
Slide the residual water drawer back
into the tower until it clicks into place.
Pre-rinse
If the steam ironing system is still hot
from the previous use, the cool down
phase will start first. This may take up
to 3hours.
The pre-rinse phase then follows (dura-
tion approx. 20minutes). During this
time, a portion of the descaling solution
is pumped into the steam generator.
After the pre-rinse phase you will be
prompted to carry out further actions.
This will be shown for a few seconds
before the pre-rinse phase starts and
will be indicated by the message In
20 min. .
Cleaning and care
55
Rinse water container and fill to
the mark
Remove the water container from the
tower.
As long as the water container is not in-
serted into the tower, the display will
show the following message Fit water
container.
Open the screw cap.
Rinse the water container thoroughly.
Make sure no residues of the descal-
ing tablets remain in the water con-
tainer.
Fill the water container with fresh wa-
ter at least up to the level marking.
Close the screw cap.
Put the water container back into the
tower.
Empty drawer
Remove the residual water drawer
from the tower.
The message Fit drawer will appear
in the display.
Empty the residual water drawer.
Slide the residual water drawer back
into the tower until it clicks into place.
Cleaning and care
56
Descale
After an activation time of approx.
1hour, the descaling solution is drained
from the steam generator into the resid-
ual water drawer.
The steam generator is then rinsed with
water. This rinse cycle takes approx.
5minutes. During this time, the Rins-
ing (5 min) message is displayed.
During the rinsing cycle, the message
Rinsing is displayed.
Once the rinsing cycle is completed, the
water is drained completely into the re-
sidual water drawer and the message
Empty drawer is displayed.
Empty drawer
Remove the residual water drawer
and empty it.
The message Fit drawer is now
shown in the display.
Rinse the residual water drawer thor-
oughly.
The residual water drawer is dish-
washer-safe or can be washed by
hand using warm water and a little
washing-up liquid.
Dry the residual water drawer. Make
sure that the metal contact disks
(contacts) at the top of the residual
water drawer are clean and dry.
Slide the residual water drawer back
into the tower until it clicks into place.
The message Descaling finished will ap-
pear in the display.
Press the OKbutton.
The soleplate of the iron must then be
rinsed.
Cleaning and care
57
Rinsing the soleplate
The iron must not be warm from pre-
vious use.
Let the iron cool down for at least 60
minutes before rinsing the soleplate.
Make sure that the non-stick sole-
plate has been removed from the
iron.
If the non-stick soleplate is still on the
iron, remove it now (see “Removing the
non-stick soleplate”).
Fill the water container with fresh tap
water (see “Filling the water con-
tainer”).
Set the temperature selector on the
iron to “cold” so that the line on the
selector is pointing to the indicator
light.
Plug the steam hose of the iron into
the steam connection on the tower
(see “Connecting the steam hose”).
If the steam ironing system is switched
off, switch it on now by pressing the
button. When the steam ironing sys-
tem is ready and steam is available, the
message Ready for use will be shown
in the display.
Hold the iron over a washbasin or a
heat-resistant container. You can also
use the residual water drawer from
the steam ironing system. Be aware,
though, that the drawer can only be
taken out of the steam ironing system
once the appliance is switched on.
During the rinsing process, hot
water and steam come out of the
iron.
Danger of burning.
Never direct the iron at people, anim-
als or electrical appliances of any
kind.
Press the button on the iron for
around a minute and tilt the iron.
Keep the tip of the iron pointing
downward slightly.
Hot water and steam will come out of
the iron and dislodge any deposits that
have built up. As soon as there is only
steam coming out, you can release the
button.
Cleaning and care
58
Now set the temperature selector on
the iron to the highest temperature
setting.
The indicator light on the temperature
selector will light up yellow whilst the
iron is heating up.
Tip: During the heat-up phase, you can
set down the iron on the designated
surface on the steam ironing system.
As soon as the indicator light goes out,
the rinsing process is complete.
Remove drops of water and deposits
from the soleplate by moving the iron
over a soft, absorbent cotton cloth
while it is still hot. Press the steam
button briefly 2-3 times in the pro-
cess.
The descaling process is now com-
plete. The steam ironing system can
now be switched off or used.
Cleaning the housing
Before cleaning the housing,
switch off at the socket and with-
draw the plug.
Depending on the level of soiling, use a
dry or moist soft cloth to wipe the hous-
ing.
Do not use abrasive cleaning agents.
Cleaning the soleplate of the
iron
The soleplate of the iron remains
hot after ironing.
Danger of burning.
Switch off at the wall socket and
withdraw the plug. Let the soleplate
of the iron cool down before you
start the cleaning process.
Depending on the level of soiling, use
a dry or moist microfibre cloth to
clean the iron soleplate.
Only use the microfibre cloth to clean
the iron soleplate!
Cleaning and care
59
To avoid damaging the surface, do
not use the following for cleaning:
- abrasive cleaning agents, (e.g.
powder cleaners, cream cleaners,
chrome polish, eraser blocks).
- hard, abrasive brushes or sponges,
(e.g. pot scourers), or sponges which
have been previously used and still
contain abrasive cleaning agents.
- pointed objects.
Cleaning or replacing the iron-
ing board cover
If the ironing board cover is soiled, you
can wash and dry it. If the ironing
board cover is damaged, it must be
replaced before using the steam iron-
ing system again.
When removing the ironing board
cover, always ensure the steam iron-
ing system is switched off and the
plug is removed from the wall
socket.
Wait until the ironing board has
cooled down.
Pull the fastener of the ironing board
cover out of the cavity at the tapered
end of the ironing board.
Undo the fastener on the ironing
board cover by pushing the small
toothed wheel at the centre of the
fastener outwards.
Remove the cover in the direction of
the tower.
The felt pad remains on the ironing
board.
Cleaning and care
60
Wash and dry the ironing board cover
according to the care label or replace
the cover if it is damaged.
Never use the steam ironing system
without the ironing board cover in
place!
Put the dry or new cover onto the
ironing board from the tower end first
and draw it down towards the
tapered end of the ironing board.
Use the cord to pull the cover taut.
Ensure the cover is secure.
Secure the ironing board cover in po-
sition by pushing the small toothed
wheel on the fastener to the middle.
Push the fastener back into the cavity
at the tip of the ironing board.
Cleaning the water filter
The water filter prevents foreign ob-
jects in the water from entering the
steam ironing system and causing
damage.
The water filter can be cleaned if it is
dirty or clogged. You will notice if the
water filter is dirty since this will cause
more frequent pumping noises from the
water feed pump.
Disconnect the power supply
Switch off at the wall socket and
withdraw the plug before cleaning the
water filter.
Removing the water container
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
Cleaning and care
61
Removing the water filter cover
Use a cross-head screwdriver to re-
move the screw of the water filter
cover.
Pull the water filter cover upwards.
The water filter must be taken out of
the right hand socket for cleaning.
There is a hook and a round tool at the
sides of the water filter cover. Use
these to remove the sealing ring from
the socket and pull out the water filter.
Removing the sealing ring
Use the hook on the water filter cover
to pull the sealing ring up and out of
the right-hand socket.
Please note that the top of sealing ring
looks different to the bottom of it. The
top has a smooth surface all round
and the bottom has a narrow ridge
around it. After cleaning the water filter
make sure that the seal is replaced
with the ridge facing downwards.
Cleaning and care
62
Pull out water filter
Push the round tool on the water filter
cover onto the water filter from
above.
The round tool will click into the water
filter.
Pull the water filter out of the socket.
Cleaning the water filter
Detach the water filter from the round
tool.
Clean the water filter thoroughly un-
der running water.
Cleaning and care
63
Inserting the water filter
Position the water filter with the small
seal facing downwards.
Press the water filter fully into the
right-hand socket.
Then replace the seal in the right-
hand socket. The side with the ridge
must face downwards.
Then replace the water filter cover
over both sockets.
Use a cross-head screwdriver to
tighten the screw.
Inserting the water container
Replace the water container in the re-
tainer in the tower.
The steam ironing system is now ready
for operation again.
If the water filter is not inserted, the
steam ironing system will not work.
The water filter must be replaced if it
is worn or damaged. Replacement
filters are available from your Miele
retailer or from the Miele Spare Parts
Department.
Optional accessories
64
Miele appliances are designed to
achieve the best possible results and to
provide uncompromising satisfaction
for as long as possible. To achieve this,
all factors must interact perfectly with
one another. Therefore Miele offers a
comprehensive range of accessories
that harmonise with Miele appliances
for optimum performance.
The following items are just a few ex-
amples from our broad range of
products, available to order from the
Miele online shop (www.miele-
shop.com), Miele Spare Parts Depart-
ment or your local Miele retailer.
Accessories
Non-stick soleplate
With the non-stick soleplate you can
iron appliqués, prints, flocking etc.
There is no need to turn the garment in-
side out. This soleplate also reduces or
eliminates the formation of shiny
patches on dark textiles.
The non-stick soleplate can be used
with all Miele steam ironing system
irons.
Ironing board cover
Miele ironing board covers are very dur-
able and highly absorbent. The separ-
ate needle felt underlay is steam-per-
meable and pleasantly cushioned.
The Miele ironing board covers can be
used for any Miele steam ironing sys-
tem.
Standard ironing board cover
The standard ironing board cover is
made of 100% cotton, and can be
washed if necessary at 40°C.
Colour: mottled grey
Premium ironing board cover
The premium ironing board cover is
particularly heat-resistant and durable.
It consists of 100% cotton and can be
washed at 40°C if required.
Colour: Tayberry red (anthracite as an
optional accessory)
Steamer
The steamer makes ironing hanging tex-
tiles easier, e.g. dresses and jackets. It
comes with a removable brush attach-
ment for lifting the fibres.
The steamer can be used with any
Miele steam ironing system.
Optional accessories
65
Care products
The Miele care product range has been
developed specially to clean your appli-
ance thoroughly and gently.
Descaling tablets for the steam iron-
ing system
Miele descaling tablets guarantee the
best cleaning result when descaling
your Miele steam ironing system.
One tablet is required for each descal-
ing process.
Problem solving guide
66
Most faults can be resolved by yourself. Time and money will be saved because a
service call will not be needed. The following guide may help you to find the
reason for a fault, and to correct it. Please note:
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu-
lations. Unauthorised or incorrect repairs can cause considerable danger to
users.
Some of the messages in the display are more than one line long. Touch the or
button to read them in full.
Problem solving guide
67
Troubleshooting
Problem Cause and remedy
The steam ironing sys-
tem cannot be switched
on.
The steam ironing system does not have any power.
Check that
– the plug is inserted into the wall socket and that
the socket is switched on.
– the fuse in your fuse panel has not tripped.
After an interruption to
the power supply, the
steam ironing system
does not work any
more.
The steam ironing system is switched off
Use the button on the control panel to switch
the steam ironing system on.
If a power cut occurred during the automatic rinse,
the cycle will be repeated when the steam ironing
system is switched on again.
If the power cut occurred during descaling, the pro-
cess will be resumed from the stage at which it was
interrupted when the appliance is switched on again.
The height of the iron-
ing board cannot be ad-
justed.
The ironing board is not locked into place on both
sides of the tower.
Use both hands to pull the ironing board up and
into the horizontal position until the locking mech-
anism audibly clicks into place on both sides of
the tower (see “Assembly”).
The steam ironing sys-
tem cannot be dis-
mantled.
The steam ironing system is not in its lowest working
position.
Adjust the steam ironing system to its lowest
working height (see “Dismantling”).
The residual water drawer is not inserted completely
and is not locked in place.
Push the residual water drawer back into the tower
until it locks into place.
Then adjust the steam ironing system to its lowest
working height (see “Dismantling”).
Problem solving guide
68
Problem Cause and remedy
The ironing board can-
not be set in the final
position during as-
sembly or dismantling.
The ironing board became dislodged from the latch-
ing mechanism when the board was not in its lowest
position.
Danger of burning on the resting surface while
it is hot.
The resting surface for the iron remains hot after
ironing.
Switch off at the wall socket and unplug it. Let the
iron and the resting surface cool down before re-
moving the iron from the resting surface, and pro-
ceed with the following steps.
Make sure the resting surface is cold before touch-
ing it.
Press and hold the yellow emergencyreleasebut-
ton on the tower ().
At the same time, turn one of the rotary controls
on the side of the tower as far as it will go in the
direction and hold it in this position ().
Push the tower down as far as possible ().
Release the rotary control first. Then release the
emergencyreleasebutton.
Now the ironing board can either be dismantled or
brought into its working position.
If the ironing board still will not lock into place,
contact Miele Service.
The iron does not heat
up.
The steam ironing system is switched off.
Problem solving guide
69
Problem Cause and remedy
Use the button on the control panel to switch
the steam ironing system on.
The steam hose is not plugged in properly.
Plug the steam hose into the steam connection on
the tower again (see “Connection”).
The iron has not been used for some time.
Move the iron or activate the steam button .
The steam button is locked.
Unlock the button by pushing the slider on the iron
forward.
The temperature set on the temperature controller
has already been reached.
Set the temperature controller to a higher temper-
ature, if necessary.
The steam ironing system is rinsing.
Wait until the rinsing process has been completed
(see “Automatic rinsing”).
The display is indicating a malfunction.
Rectify the indicated malfunction and proceed as
described in the following pages (see “Display
messages”).
The steam ironing system is damaged.
Contact Miele Service.
Problem solving guide
70
Problem Cause and remedy
The ironing board is not
heated.
Steam has not been used for a while.
Press the steam button . This will activate the
ironing board's heating system.
The steamer is attached to the steam connection on
the tower.
The ironing board does not heat up when the
steamer is connected.
The ironing board is not locked into place on both
sides of the tower.
Ensure the ironing board locks into place on both
sides of the tower (see “Assembly”)
The steam ironing system is damaged.
Contact Miele Service.
The temperature of the
iron is always high.
There is a fault.
Contact Miele Service.
The ironing board cover
is damp.
There is a fault.
Remove the ironing board cover and allow it to
dry.
Put the dry ironing board cover back on (see
“Cleaning or replacing the ironing board cover”).
If the ironing board gets damp again, contact Miele
Service.
Water is leaking from
the steam ironing sys-
tem at the height of the
water container when it
is being transported.
The frequent removal and replacement of the water
container may cause water droplets to collect in the
area under the water container.
Use a cloth to dry the area underneath the water
container.
The water filter is not inserted correctly.
Check the water filter.
The sealing rings are leaking.
Replace the sealing rings.
Problem solving guide
71
Problem Cause and remedy
The fan on the ironing
board is not running.
Steam was not used.
The fan only runs when the steam function on the
iron is activated.
The appliance is not yet ready to produce steam.
Wait until the message Ready for use is dis-
played to indicate that steam is ready.
The water container is empty or not inserted.
Refill the water container with fresh mains water
and replace it in the tower.
The steamer is connected.
The fan only runs when the iron is connected.
Connect the iron.
There is a fault with the steam ironing system.
Call Miele Service.
The steam function on
the iron or the steamer
is not working.
The steam ironing system is not connected to the
wall socket.
Insert the plug into the socket correctly and switch
on.
Use the button on the control panel to switch
the steam ironing system on.
The iron or steamer is not connected.
Attach the steam hose of the iron or the steamer to
the steam connection of the tower.
The water container is empty or not inserted.
Fill the water container with fresh water.
Insert the water container into the tower.
Wait until the message Ready for use is dis-
played.
The appliance is not yet ready to produce steam.
Wait until the message Ready for use is dis-
played.
The display is indicating a malfunction.
Rectify the indicated malfunction and proceed as
described in the following pages (see “Display
messages”).
If there is still no steam, contact Miele Service.
Problem solving guide
72
Problem Cause and remedy
When using the steam
button on the iron,
drops of water or white
deposits escape from
the steam jets.
The selected temperature level on the iron is too low.
Set the temperature selector to at least (see
“Selecting the ironing temperature”).
The iron has not yet reached the selected temperat-
ure.
Wait until the selected ironing temperature has
been reached (see “Selecting the ironing temperat-
ure”).
During a longer ironing break, condensation has ac-
cumulated in the steam hose.
After a break in ironing, do not direct the first burst
of steam onto the garment.
Deposits have formed in the soleplate.
Rinse the soleplate (see “Descaling process”).
Problem solving guide
73
Display messages
Message Cause and remedy
Drain valve closing When the steam ironing system was switched on,
the steam generator drain was open. The drain is
closed automatically during this message.
Drain valve fault
Switch off/on
The descaling or rinsing processes have not been not
carried out properly.
Press the button to switch the steam ironing
system off and then back on again.
If the fault message continues to be displayed,
contact Miele Service.
Memory fault
Switch off/on
There is a fault with the steam ironing system.
Press the button to switch the steam ironing
system off and then back on again.
The steam ironing system must now be reset.
Complete the steps required when using for the
first time (see “Before using for the first time”).
If the fault message continues to be displayed,
contact Miele Service.
Unplug at mains
Electronic fault.
Switch off at the wall socket and withdraw the
plug.
Wait a while and then insert the plug back in the
socket and switch on.
Press the button to switch the steam ironing
system back on again.
The steam ironing system will try and rectify the fault
itself.
If the fault message continues to be displayed,
switch off at at the wall socket and withdraw the
plug. Contact Miele Service.
Problem solving guide
74
Message Cause and remedy
Inlet fault, boiler
Switch off/on
There is a fault with the steam system.
Press the button to switch the steam ironing
system off and then back on again.
After the cool-down phase, the steam ironing system
will carry out an additional rinse function and attempt
to correct the fault itself. The cool-down phase can
take up to 3hours.
Remove the residual water drawer if you are
prompted to do so by the appropriate message in
the display.
Empty and dry the residual water drawer.
Push the residual water drawer back in the tower
until it clicks into place.
There is a fault with the steam ironing system.
If the fault message continues to be displayed,
contact Miele Service.
Pressure switch
fault. Switch off/on
There is a fault with the steam system.
Press the button to switch the steam ironing
system off and then back on again.
If the fault continues to be displayed, contact
Miele Service.
Boiler fault, warm
Switch off/on
There is a fault with the steam ironing system.
Press the button to switch the steam ironing
system off and then back on again.
If the fault continues to be displayed, contact the
Miele Customer Service Department.
The steam generator is soiled with water containing
too much limescale or salt.
Start a descaling process (see “Starting the de-
scaling process early”). To avoid this problem in
the future, the preset water hardness level can be
set one level higher (e.g., from Level 4 to Level 5,
see “Setting the water hardness”).
If the fault continues to be displayed, contact the
Miele Customer Service Department.
Problem solving guide
75
Message Cause and remedy
Boiler fault, cold
Switch off/on
There is a fault with the steam ironing system.
Press the button to switch the steam ironing
system off and then back on again.
If the fault continues to be displayed, contact
Miele Service.
Release stm. button
The iron has switched itself off because it has not
been used for a period of time and the steam but-
ton has locked.
Unlock the steam button by pushing the slider
for continual steam on the iron forwards.
Attach hose The steam hose is not properly plugged into the
steam connection.
Plug the steam hose into the steam connection on
the tower.
Problem solving guide
76
Message Cause and remedy
Drain valve fault
Switch off/on
The residual water drawer has not been detected.
Press the button to switch the steam ironing
system off and then back on again.
After switching the steam ironing system off and
back on, the residual water drawer has not been de-
tected.
Press the button to switch the steam ironing
system off.
Clean and dry the metal discs (contacts) on the re-
sidual water drawer.
Use the button to switch the steam ironing sys-
tem back on and follow the instructions shown in
the display:
Remove the residual water drawer and fill it with
fresh tap water.
Put the filled residual water drawer back in the
tower.
Remove the residual water drawer again when you
are prompted to do so and the appropriate mes-
sages are shown in the display.
Empty and dry the residual water drawer.
Put the empty residual water drawer back in the
tower.
The steam ironing system is now ready for operation
and will continue to operate from the point reached
before the fault was registered.
There is a fault with the steam ironing system.
If the fault message continues to be displayed,
contact Miele Service.
Fault codes:
F38: ELP/EW/LNG
F44
F45: LNG
F47
There is an internal fault.
Press the button to switch the steam ironing
system off and then back on again.
The steam ironing system will try and rectify the fault
itself.
If the fault message continues to be displayed, con-
tact Miele Service.
Service
77
Service
In the case of a fault that you cannot
rectify yourself, contact
- your Miele retailer
or
- Miele Service.
The customer service telephone num-
ber can be found at the end of these
operating instructions. Please note
that telephone calls may be monitored
and recorded for training purposes.
When contacting Miele please quote
the model and serial number of your
appliance.
This information can be found on the
data plate which is located on the tower
behind the water container.
Warranty
For information on the appliance war-
ranty specific to your country please
contact Miele. See back cover for ad-
dress.
In the UK, your appliance warranty is
valid for 2 years from the date of pur-
chase. However, you must activate your
cover by calling 0330 160 6640 or re-
gistering online at www.miele.co.uk.
Electrical connection UK
*INSTALLATION*
78
Before you connect the steam iron-
ing system, you must check the con-
nection data (voltage and frequency)
on the data plate and compare it with
the data applicable to your local
power supply.
Compliance with this data is mandat-
ory, otherwise there is a risk of dam-
age to the steam ironing system.
If in doubt, consult a suitably quali-
fied electrician.
You will find the necessary connection
data on the data plate, which is located
in the tower behind the water container.
The steam ironing system is supplied
with a cable and moulded plug ready
for use with an alternating current of
50-60 Hz, 220-240 V. Connect the
steam ironing system only to a properly
installed earthed socket compliant with
BS 7671 in the UK. All electrical work
must be carried out by a suitable quali-
fied and competent person in accord-
ance with current local and national
safety regulations (BS 7671 in the UK).
The fuse must have a rating of at least
10 A (13 A in the UK). However, in order
to increase safety, we recommend pro-
tecting the appliance with a 30 mA re-
sidual current operated circuit-breaker
(RCD).
The appliance should be connected to
the power supply by a suitable
switched socket which must be easily
accessible.
If the power cable is defective, it must
only be replaced by a suitably qualified
electrician.
Do not use a multi-socket unit or an
extension cable to connect the
steam ironing system to the power
supply.
Extension cables or multiple sockets
do not guarantee the required safety
of the steam ironing system (e.g.
danger of overheating).
Do not connect the steam ironing
system to an off-grid inverter. These
devices are used for autonomous
power supply, e.g. a solar power
system.
Power surges could cause a safety
shutdown. This could damage the
electronics.
Do not use the steam ironing system
with what are referred to as “energy
saving plugs”.
These reduce the energy supply to
the appliance, which could generate
excessive heat.
Electrical connection UK
*INSTALLATION*
79
Technical data
80
Dimensions, folded (HxWxD) 1.280 × 470 × 370mm
Assembled dimensions (HxWxD) 970 × 470 × 1.480mm
Weight B4312 and B4826
Weight B4847
29kg
30kg
Supply voltage See data plate
Power rating See data plate
Fuse rating ≥ 10 AA
Steam pressure B4312
Steam pressure for B4826 and B4847
3,5bar
4,0bar
Steam quantity 100g/min
Water container volume 1,25l
Length of mains connection cable 2,50m
Length of steam hose 1,80m
Height of ironing board 830–1.020mm
Width of ironing board 400mm
Length of ironing board 1.200mm
Product safety standard in accordance with EN60335-1, EN60335-2-3,
EN60335-2-85
Test certifications awarded See data plate
United Kingdom
Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW
Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: [email protected]
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive
Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
Miele Electrical Appliances Co., Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500
Fax: +86 21 6157 3511
E-mail: [email protected],
Internet: www.miele.cn
China Mainland
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025
Fax: (852) 3579 1404
Email:
Website: www.miele.hk
Hong Kong, China
Miele India Pvt. Ltd.
1st Floor, Copia Corporate Suites,
Commercial Plot 9,
Mathura Road, Jasola,
New Delhi - 110025
E-mail: customercare@miele.in
Website: www.miele.in
India
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel: (01) 461 07 10
Fax: (01) 461 07 97
E-Mail: [email protected]
Internet: www.miele.ie
Ireland
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana
Petroleum
Solaris Dutamas No. 1
Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Miele New Zealand Limited
IRD 98 463 631
8 College Hill
Freemans Bay, Auckland 1011
New Zealand
Tel: 0800 464 353
Internet: www.miele.co.nz
New Zealand
Miele Pte. Ltd.
29 Media Circle
#11-04 ALICE@Mediapolis
Singapore 138565
sTel: +65 6735 1191
Fax: +65 6735 1161
E-Mail: [email protected]
Internet: www.miele.sg
Singapore
Miele (Pty) Ltd.
63 Peter Place
Bryanston 2194
P.O. Box 69434
Bryanston 2021
Tel: (011) 875 9000
Fax: (011) 875 9035
E-mail: [email protected]
Internet: www.miele.co.za
South Africa
Miele Appliances Ltd.
Showroom 1
Eiffel 1 Building
P.O. Box 114782 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-Mail: [email protected]
Website: www.miele.ae
United Arab Emirates
Manufacturer:
Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Thailand
Miele Appliances Ltd.
BHIRAJ TOWER at EmQuartier
43rd Floor Unit 4301-4303
689 Sukhumvit Road
North Klongton Sub-District
Vadhana District
Bangkok 10110, Thailand
Sheikh Zayed Road, Umm Al Sheif
M.-Nr. 12 027 620 / 00en-GB
FashionMaster
