Loading ...
Loading ...
Loading ...
Cleaning and care
56
Descale
After an activation time of approx.
1hour, the descaling solution is drained
from the steam generator into the resid-
ual water drawer.
The steam generator is then rinsed with
water. This rinse cycle takes approx.
5minutes. During this time, the Rins-
ing (5 min) message is displayed.
During the rinsing cycle, the message
Rinsing is displayed.
Once the rinsing cycle is completed, the
water is drained completely into the re-
sidual water drawer and the message
Empty drawer is displayed.
Empty drawer
Remove the residual water drawer
and empty it.
The message Fit drawer is now
shown in the display.
Rinse the residual water drawer thor-
oughly.
The residual water drawer is dish-
washer-safe or can be washed by
hand using warm water and a little
washing-up liquid.
Dry the residual water drawer. Make
sure that the metal contact disks
(contacts) at the top of the residual
water drawer are clean and dry.
Slide the residual water drawer back
into the tower until it clicks into place.
The message Descaling finished will ap-
pear in the display.
Press the OKbutton.
The soleplate of the iron must then be
rinsed.
Loading ...
Loading ...
Loading ...