Loading ...
Loading ...
Loading ...
ACCESSORIES AssistHandle 530402657
SafetyGlasses........ 71-85707 BoltCarriage,1/4-20 530401989
ExtensionCord........ 71-5702 WingNut 530016152
USERREPLACEABLESERVICE ShietdAssembly 530402673
Screw 530015815
PARTS CuttingHead 952701666
Spoolwith.065' Line 71-65822
Prepare unit for storage at end of sea-
son or if it will not be used for 30 days
or more.
WARNING:
• Stop the unit and disconnect the pow-
er source when not in use,
• Carry the unit with motor stopped.
• Store the unit so the line limiter blade
TROUBLESHOOTING CHART
cannot cause injury.
• Store unit and extension cord indoors
in a high, dry place out of the reach of
children, Store unit unplugged.
• Store unit with all guards in pIace.
Position unit so that any sharp object
cannot accidentally cause injury.
TROUBLE CAUSE REMEDY
Semi-automatic • Crowding trimmer Iine •AiIow tip of _ine to do the cutting.
head stops under against matedaI being cut
a load or does not • EIectrical failure. • Contact your Sears Service Center.
turn when switch • Thrown circuit breaker • Check Breaker Box.
is pressed. • Debris stopping head • Remove debris
Line does not • Line improperly routed Check line routing
advance or in head.
breaks while • Line improperly wound Rewind line tightIy and evenly
cutting, onto spool
• Incorrect line size Use only .065 in. diameter line.
• Not enough _ine outside Pull 4 Inches of line outside head
head.
• Dirt buildup on cover Clean cover.
Line welds onto * Line size is incorrect. * Use only .065 in. diameter line.
spool. • Incorrect spool. • Replace with correct spool.
• Line is being crowded • Cut with tip of line fully extended.
against materiaI being cut
Line releases • Line improperly routed • Check Iine routing.
continuously in head.
• Spool damaged. • Replace spook
Line usage is • Line improperly routed • Check Iine routing.
excessive, in head.
• Line size is incorrect. • Replace spool
• Crowding line against • Cut with tip of line fuily extended.
material being cut.
• Spool teeth worn • Replace Spool
or damaged
Line pulis back • Too tittie Iine outside • Remove cover and pull 4 inches
into head. head. of line outside head
• Line size incorrect. • Use only .065 in. diameter line.