Loading ...
Loading ...
Loading ...
AV 32/36S33/36/320/330/360 ENG 10/2/02 _19 PM Page 13
I
Step Three-The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television. A complete description of the Plug In Menu can
be found starting on page 25. We recommend you complete the Piug In Menu items before you
start using your television. But to begin watching your television right away you only need to
run the Auto Tuner Setup. This lets your television learn the channels it is able to receive. To
run the Auto Tuner Setup follow the steps below.
INTERACTIVE PLUG IN MENU>
AUTO TUNER SETUP
TUNER MODE <CABLE"
[]START
SELECT BYD[
OPERATE BY[][] EXIT ByI_3B_I
Pressthe • buttontomovetoAUTOTUNER
SETUP
• • To choose CABLE (if you are connected to a
cable system) or AIR (if you use an antenna) or
SKIP (if you need to)
• To move to START
The Auto Tuner will now memorize all of the clear, active channels your television can receive.
This will take one or two minutes.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete 13
Loading ...
Loading ...
Loading ...