Loading ...
Loading ...
Loading ...
22
REMOVING THE OVEN DOOR FOR CLEANING
Removing the oven door and the glass panel inside the door enables full access
to the entire oven cavity for easier cleaning and maintenance.
• Before you start, place some soft, padded material on the floor or benchtop.
• Clean the oven glass door only with a damp cloth and a small amount of mild
detergent. Make sure the cloth is clean and does not contain residues of other
cleaning products.
• If you want to remove the inner glass panel for cleaning while you have taken
the door off the oven, please refer to the next page for instructions.
• To refit the door, carefully slide the hinges back into their slots and open the
door fully. IMPORTANT: The movable latches (B) must be closed back into their
original positions before closing the door.
• Open the oven door completely and have a
look at the door hinges (1). The hinges
(A) have two movable latches (B) on them.
If you raise both these latches, the hinges
are released from the oven housing.
• Close the door to an angle
approximately 15°.
• With both hands, grip the sides of the
door at the centre and then incline it
slightly towards the oven cavity and then
pull the door gently away from the oven
cavity (2).
IMPORTANT: Make sure that the door is
supported at all times and that you place it
on some padded material while cleaning it.
• Place the door flat on the prepared soft
material for cleaning.
CLEANING & MAINTENANCE (cont.)
1
2
Loading ...
Loading ...
Loading ...