Loading ...
Loading ...
Loading ...
56 - CLEANING AND MAINTENANCE 914779553/C
Sanitization
Sanitization with steam allows to remove the last
residues of descaling from the hydraulic circuit.
1. Open the door.
2. Turn the function knob on the 40% steam
assisted function.
3. Turn the temperature knob to the value of
200°C.
4. Pull the loading drawer out of its housing.
5. Insert the funnel provided in the loading
drawer.
6. Pour 500 ml water (using a bottle or a
measuring jug).
7. At the end, remove the funnel and place the
loading drawer back in its place.
8. Close the door.
9. Use the digital programmer to set a timed
cooking of 30 minutes.
10.Wait for the function to be executed until the
end.
11.When the function has finished, turn the
function and temperature knobs to the 0
position.
12.Open the door
13.Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
14.Turn the function knob clockwise to the
reservoir drain function
.
The water starts to flow into the deep pan from
the drain pipe on the right side of the rear wall
of the oven cavity.
15.Wait for the end of the exhaust flow (check
that both level indicator lights are
switched off).
16.At the end, return the function knob to the 0
position.
17.Drain the water from the deep pan.
18.Wipe off any spillage of water in the
cooking compartment with a cloth or
sponge.
19.Close the door.
Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Use a tool (e.g. a spoon) to remove the bulb
cover.
4. Slide out and remove the light bulb.
5. Replace the light bulb with one of the same
type (40 W).
Take care: wait for the oven cavity to
cool down.
Power voltage
Danger of electrocution
• Unplug the appliance.
• Wear protective gloves.
Take care not to scratch the enamel of
the oven cavity wall.
Do not touch the halogen light bulb
directly with your fingers, use an
insulating material.
Loading ...
Loading ...
Loading ...