Loading ...
Loading ...
Loading ...
operating _31
03 OPERATING
Auto Cleaning
The Robot vacuum will move by itself and automatically clean the
house until cleaning is completed once.
■
If you press the Start/Stop button on the main unit or remote control
without selecting a cleaning mode, an automatic cleaning run starts.
■
If cleaning begins when the Robot vacuum is docked with the Charger
(Station), the time to return to the Charger (Station) is decreased since
the Robot vacuum remembers its original position while moving.
■
If the Robot vacuum starts the current cleaning run at a location other
than the Charger (Station) and fails to locate the Charger (Station) while cleaning, it will stop
near the location where it started cleaning.
■
If the battery level becomes too low while cleaning, the Robot vacuum will automatically return
to the Charger (Station) and resume cleaning after charging its battery.
(Number of cleaning operations resumed : Once)
Main unit button
Remote control
button
Configuration
Sequence
Normal Mode
Turbo Mode
Dust Sensor Mode
Cleaning Complete
1time
▶
1. Set the mode.
2. Cancel the mode.
About the Resume Cleaning function
• If the Robot vacuum has evaluated that cleaning is
complete, the resume cleaning function is not performed.
• If you move the Robot vacuum when it is being charged or
press a button, the Robot vacuum judges cleaning to be
complete and does not resume cleaning.
• Do not move the Robot vacuum when it is cleaning or
press a button while it is cleaning. Otherwise, the Robot
vacuum judges cleaning to be complete and starts cleaning
again from the beginning.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
• Each time you press the Dust Sensor button, the Dust
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
NOTE
CAUTION
2014. 7. 23. 6:14
Loading ...
Loading ...
Loading ...