Loading ...
Loading ...
Loading ...
operating _29
03 OPERATING
USING THE ROBOT VACUUM
Starting/Stopping Cleaning
You can run or stop all Robot vacuum functions.
■
Each Robot vacuum function only runs when the Power
Switch is turned on.
■
When the Robot vacuum is operating, press the (
) button
to cancel the operation and select a function.
Turning the power on or off
Turning the power on
- Main unit: Press the (
) button.
Turning the power off
- Remote control: Press the [Power] button.
- Main unit: Press and hold the (
) button down for 3 seconds.
❈
If it is left idle for about 15 minutes in the Image Standby mode, then it
returns to Charging mode automatically in order to save battery power.
Please make sure that the robot is docked with the charging station
after every use.
Starting or stopping cleaning
Starting
- Remote control : Press the Auto, Spot, Max, Manual button.
- Main unit : Select Auto, Spot, Max mode by using the (
) button
and then pressing the (
) button.
- When cleaning begins, the Robot vacuum starts to move.
❈
Pressing the (
) button without selecting cleaning mode starts
to perform the Auto mode cleaning.
Stopping
- To stop, press the (
) remote control or main unit button.
- When cleaning is stopped, the Robot vacuum stops.
Using the main unit
buttons
Using the remote
control
2014. 7. 23. 6:14
Loading ...
Loading ...
Loading ...