Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE SERVICE
Check Srake Oper_ti°n _ _
Check Tire Pressure
iCheck Operator Presence and
T ;nteriock Systems If
R Check for Loose Fasteners V* V'7 If
AC Sharpen/Replace Mower Blades _4
T Lubrication Chart I If
0 I Check Battery Level
R Clean Battery and Terminals li_
Check Transaxle Cooling V'
Adjust Blade Belt(s) Tension I_s
Adjust Motion Drive Belt(s) Tension V's
Check Engine Oil Level If If
Change Engine Oil 1_,_3 If
E Clean AIr Filter _V':
N Clean Air Screen
v"
G inspect Muffler/Spark Arrester
N Replace Oil Filter (if equipped) Vl.=
Clean Engine Cooling Fins VW=
Replace Spark Plug _2 V*
i
Replace Air Filter Paper Cartridge I
Replace Fuel Filter V'
i
Change Coolant Ks
1 - Change more often when operating under a hea W load or In high ambient temperatures. 6 - Not re'q_lr ed if equipl:_d with mainte_ance-tme batte_.
2 * Service more often when operating In di_' or dusly condi_orts. 7 - 33ghten 1rent axle I_VOt bolt to 35 II.*lb_. maximum.
3 ° if equipped with oil filter, change oll every 50 hours. DO not overtightsn.
4 - Rep_e blades more often when mowing In sandy soil. 8 ° Havi you# nearelt a_'the riz_KISeP*_Ce center/deparlmerd
5 - If equipped with adjustsbl8 system, perform th_i service.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check coolant level.
3. Check brake operation.
4. Check tire pressure.
5. Check operator presence and
interlock systems for proper operation.
6. Check for loose fasteners.
LUBRICATION CHART
(D Tie Rod Ball Joints
_)Spindle _ _Z_L'_-- Spindle(_)
l ........ --_-'-1 Zerk
Zerk_ "_.... _ ,_._Front Wheel _)
(_)Front Wheel '_,-._ I_ Bearing
Bearing zerl
(_)Steering-'_ _ii_)-'-'_r k
Sector \ _ne_
Gear Teetl_ ..,: i __,1 I I (2JMandrel
Zerks
(_Spray Silicone Lubnant (Move Boots to
Lubricate)
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type
lubricant sparingly.
2O
Loading ...
Loading ...
Loading ...