Loading ...
Loading ...
Loading ...
3. ALWAYSpointsprayguninasafedirectionandsqueeze
sprayguntriggerto releaseretainedhighwater
pressure.
IMPORTANT:Sprayguntrapshighwaterpressure,even
whenengineisstoppedandwaterisdisconnected.
Thehighpressurestreamofwaterthatthis
equipmentproducescancutthroughskinandits
_ nderlyingtissues,leadingtoseriousinjuryand
)ossibleamputation.
Sprayguntrapshighwaterpressure,evenwhen
engineisstoppedandwaterisdisconnected,
whichcancauseinjury.
o Keephighpressurehoseconnectedtopumpandspraygun
whilesystemispressurized.
o ALWAYSpointsprayguninsafedirectionandsqueezespray
guntrigger,toreleasehighpressure,everytimeyoustop
engine.Engagetriggerlockwhennotinuse.
4. Engagetriggerlockonspraygunwhennotinuse.
How to Use Accessory Tray
The unit is equipped with an accessory tray with placesto
store your ProjectProTM nozzles, HydroFoamTM launcher, spray
gun and nozzle extension. There is also a hook at the front of
the accessory tray to hold your high pressure hose. Identify
all accessories with the illustration on page 6.
NOTE:The extra hole in the tray is for storing a utility brush.
The extra clip in the tray is for storing a turbo nozzle.The
brush and turbo nozzle are NOT included with your pressure
washer. You can buy these items as optional accessories.
1. Place nozzleextension through hole on accessory tray,
as shown.
Howto UseProjectProTM HozzleSystem
The quick-connect on the nozzleextension allows you to
switch betweenthree different ProjectProTM system nozzles.
ProjectProTM nozzlescan be changed while pressure washer
is running once spray gun trigger lock is engaged. The
ProjectProTM nozzlesvary the pressure and spray pattern as
shown.
High Pressure
Delicate General Max
40° Yellow 15° Orange 0° Red
1750 PSI 2200 PSI 2500 PSI
2.3 GPM 2.2 GPIV1 2.0 GPM
Followthese instructionsto changePrejectPre TM nozzles:
1. Engagetrigger lock on spray gun.
WARHJHG
The high pressure stream of water that this
,_ equipment produces can cut through skin and itsunderlying tissues, leading to serious injury and
_ossibleamputation.
o NEVERexchangeProjectProTM nozzleswithoutlockingthe
triggerlock on thetrigger.
o DONOTtwist ProjectProTM nozzleswhilespraying.
2. Pull backcollar on quick-connect and pull current
ProjectProTM nozzle off. Store ProjectProTM nozzlesin
holder provided on the accessory tray.
Select desired ProjectProTM nozzle:
* For delicate rinse (lower pressure and higher flow),
for gentle cleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc., select yellow
delicate ProjectProTM nozzle.
,
,
3.
4.
,
Place spray gun through hole on accessory tray on right
side of unit.
Insert multi-colored ProjectProTM nozzlesin spaces
provided in accessory tray.
Insert HydroFoamTM launcher in spaceprovided in
accessory tray next to the multi-colored ProjectProTM
nozzles.
Hang high pressure hose on hook attached to accessory
tray on front of tray as shown.
13
Loading ...
Loading ...
Loading ...