Loading ...
Loading ...
Loading ...
Fig. 13
u
Remove both screws with the T25 screwdriver.
u
Lift and remove the bearing bracket.
Fig. 14
u
Release the cover and remove from the side.
Fig. 14 (1)
u
Rotate the cover 180° and clip onto the other side from the
right.
Fig. 14 (2)
u
Click the cover into place.
Fig. 14 (3)
u
Position the screw with a T25 screwdriver.
Fig. 14 (4)
u
Position the upper bearing bracket.
Fig. 14 (5)
w
Place the pins in the provided screw holes.
u
Tighten the screw.
Fig. 14 (4)
u
Insert the screw with a T25 screwdriver and tighten.
Fig. 14 (6)
4.3.4 Moving the lower bearing parts to the
other side
For all appliances:*
Fig. 15
u
Lift the bearing pin completely upward and remove.
Fig. 15 (1)
u
Undo the screws with a T25 screwdriver and remove the
bearing bracket
Fig. 15 (2)
For appliances without a soft top mechanism:*
Fig. 16
*
u
Loosen the screw using a T25 screwdriver.*
Fig. 16 (1)
u
Lift the door closure aid and turn it 90° to the right in the
hole.*
Fig. 16 (2)
u
Tighten the screw using a T25 screwdriver.*
Fig. 16 (3)
For all appliances:*
Putting into operation
10 * Depending on model and options
Loading ...
Loading ...
Loading ...