Craftsman 32037610 Operator's Manual

Loading ...

LiNE UP THE IN-FEED AND OUT=FEED FENCE

WARNING: Failure to unplug your router could result in accidental starting

causing serious injury.

If the in-feed and out-feed fences are not in alignment when the red indicator

lines are aligned with the red lines on the micro-adjustment knobs; align the in-

feed and out-feed fences as follows:

1. Set the twin fence micro-

adjustment knobs to align the

red lines on the knobs with

the red indicator lines and

lock them in place (Fig. 26a).

2. Place a straight edge guide (not

supplied) against the out-feed

and in-feed fences (Fig. 26b).

3. If the in-feed or out-feed

doesn't rest against the

straight edge guide, perform

Steps 4 through 7.

4. Loosen the six locking bolts

with the wrench (supplied) (the

bolts are at the bottom of the

fences as you face the micro-

adjustment knobs) (Fig. 26c)

5. Adjust the fences until they

both rest against the straight

edge guide.

6. Once the set is finished,

tighten the locking bolts.

7. Tighten the

micro-adjustment knobs.

Red

indicator line

Fig. 26b

Straight edge guide

Fig. 26c

Locking bolts

37610 Manual_Revised_12 1221 Page 27

Loading ...

Craftsman 32037610 PREMIUM DiE CAST ALUMINUM ROUTER TABLE