Loading ...
Loading ...
Loading ...
NOTICE: To adjust the level of the Fig. 16a
mounting plate, you should loosen
the mounting plate mounting
screws, and tighten them when
the adjustment is finished. But do
not over-tighten.
NOTICE: Make sure that the
mounting plate surface is lower
than the table surface.
TO REMOVE THE ROUTER
,_ WARNING: Make sure that
the router is not plugged into a power outlet when installing into the table,
removing from table, making any adjustments or changing accessories.
1. Loosen the mounting plate locking screws by turning them
counterclockwise with the wrench (supplied) and remove the four
screws (Fig. 12).
2. Remove the mounting plate from the router table.
3. Loosen three flat-head bolts (W) by turning them counterclockwise with the
wrench supplied (Fig. 15) and remove all the flat-head bolts (W).
4. Remove the router from the mounting plate.
NOTICE: The fence must be removed from the router table when removing or
reinstalling the router mounting plate.
ATTACHING THE FENCE ASSEMBLY TO THE TABLE (Fig. 17}
,_ WARNING: Always unplug the
router before attaching or removing
the fence. The fence has been
shipped completely assembled.
1. Loosen the fence
assembly knob.
2. insert the fence assembly
knobs into the holes on the
router table.
Fig. 17 Fence assembly knob
3. Adjust the fence to your
desired position and tighten Hole
the fence assembly knob by
turning it clockwise.
NOTICE: Use the scale on the table as a guide when aligning the fence for
routing operations. Once the fence is positioned and aligned correctly, tighten all
the clamping knobs securely.
37610 Manual_Revised_12 1221 Page 21
Loading ...
Loading ...
Loading ...