Loading ...
Loading ...
Loading ...
LCD DISPLAY
Cooling Mode
Dehumidifying Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Heating mode
Set Temperature Display
Auto-timer Setting Display
Warning Light (the ma-
chine will stop running)
Features
ELECTRONIC CONTROL
INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control pannel and remote controller and all its functions. Select
the functions you desire based on the associated symbol.
The unit can be controlled by the control panel alone or with the remote controller.
LCD DISPLAY
STOP
CONTROL PANEL
KEY PAD FUNCTIONS
Power Switch: Turns unit ON/OFF
Mode: Allows you to scroll through and select de-
sired operating mode.
Fan: Select from three different fan settings, high,
medium and low.
Auto-Timer
Auto-Timer Adjust: Auto turn off: with machine in running
mode, press timer button to set timer control. Press ▲ or
▼ buttons to select number of hours you would like the unit
to run before it automatically shuts off. Auto turn on: with
machine in stand by mode, press timer button to set timer
control. Press ▲ or ▼ buttons to select number of hours
before the unit automatically starts running under any mode.
Note: The time is adjustable between 1-24 hours.
Temperature Adjust: Used for adjusting the thermostat. The
default display is room temperature. In cooling mode, when
▲ or ▼ button is pressed, the set temperature is displayed
and may be adjusted. After 10 seconds the display will revert
back to room temperature. Temperature is only adjustable in
cool mode.
Note: By pressing both ▲ and ▼ buttons at the same
time for more than 3 seconds, the display will toggle
between °C and °F.
Warning Light: Condensed water may accumulate in the
unit. If the internal tank becomes full, the warning signal in
the LCD Display will light up and the unit will not operate until
it has been drained.
7
Loading ...
Loading ...
Loading ...